Skip to main content
Two Wheeler Engineering, Two Wheeler Mechanics in Attibele, Bengaluru
1 / 1
Automobiles

Two Wheeler Engineering

Attibele, Bengaluru
Not verified Claimed

Live now:Today's deal

5% offyour bill

About

Two Wheeler Engineering is a two-wheeler repair workshop in Attibele, Bengaluru, Karnataka. The address on record is Mayura Engineering, IIndlabele, Sarjapura - Attibele Rd. You can call or WhatsApp on the number shown on this page, or send an enquiry through LocalSaathi. Vehicle workshops usually handle periodic servicing, engine and brake repairs, electrical faults and parts replacement, for one brand or for many. Before you decide: ask for an estimate before work starts, whether parts are genuine, whether there is a warranty on the repair, and when the vehicle will be ready. This listing is built from public business information and has not been verified by LocalSaathi or confirmed by the owner, so please check timings, services and charges directly with Two Wheeler Engineering. If this is your business, you can claim the listing to add your own photos, services and prices. Services listed for Two Wheeler Engineering include puncture repair, carburettor cleaning and fork oil seal replacement. Many two-wheeler shops in Bengaluru also take on engine work beyond routine service, such as fixing oil leaks, replacing piston rings, adjusting valve clearance and cleaning the fuel system. A full or top end engine overhaul usually takes a day or more and is quoted after the engine is opened. When you hand over your bike at a two-wheeler service shop like Two Wheeler Engineering, remove anything kept under the seat or in the glove box that you will need. Note the odometer reading and fuel level. Shops in Attibele, Bengaluru are often busy on Sunday mornings, so a weekday visit may mean a shorter wait.

Key Business Highlights

Deals today

1

Credentials & Certifications

LocalSaathi verification

Not verified yet

Awarded only after document verification

Services & Prices

  • Chain cleaning, lubrication and adjustment

    From ₹270 / job

    Approx. price · confirm with the business

    The chain is cleaned of mud and old grease, lubricated with chain spray, and adjusted to the right slack. Doing this every 500 to 1,000 km, and after rain, helps the chain and sprockets last longer and keeps the ride smooth and quiet.

  • Clutch, brake or throttle cable change

    From ₹300 / cable

    Approx. price · confirm with the business

    A stretched or frayed cable makes the clutch hard, the brake weak or the throttle sticky. The old cable is removed, a new one is routed along the same path and adjusted for the right slack. Cables cost little but matter a lot.

  • Front fork oil seal replacement

    From ₹1,300 / pair

    Approx. price · confirm with the business

    Oil leaking down the front fork tubes means the seals are worn, which makes braking and bumps feel harsh. The forks are opened, new seals are fitted, and fresh fork oil is filled. Both sides are usually done together to keep the ride even.

  • General service for a commuter bike

    From ₹700 / service

    Approx. price · confirm with the business

    Covers an engine oil change, air filter cleaning, spark plug check, carburettor or throttle cleaning, brake and clutch adjustment, chain lubrication and a check of lights, horn and battery. Most shops finish with a wash. Parts found worn are usually charged extra.

  • Self-start motor repair

    From ₹1,500 / job

    Approx. price · confirm with the business

    When the self-start clicks, turns slowly or does nothing while the battery is fine, the starter motor or relay may be at fault. The motor is removed, its brushes and gear are checked, and worn parts are replaced or the unit is changed.

  • Spark plug replacement

    From ₹450 / plug

    Approx. price · confirm with the business

    A worn spark plug can cause hard starting, misfiring, jerks and poor mileage. The old plug is removed, the gap on the new one is checked, and it is fitted to the right tightness. Some bikes use two plugs, which raises the cost.

More services

Brake shoe replacement

Brake shoe replacement

Time varies
Carburettor cleaning

Carburettor cleaning

Time varies
Engine overhaul

Engine overhaul

Time varies
Fork oil seal replacement

Fork oil seal replacement

Time varies
Puncture repair

Puncture repair

Time varies
Wiring and light repair

Wiring and light repair

Time varies

Hot Deals

1 live now

New codes every day · valid till 11:59 PM

Today's deal Offer of the day20 of 20 left today

5% off your bill

Valid all day today

Terms: 5% off the total bill. Code valid today only. Get a new code each day. One code per customer per deal per day. Cannot be combined with other offers unless the shop says so.

Share

Your code · Two Wheeler Engineering

Tap Get code to unlock

Free Single use Valid today

Codes are single-use and valid today only (till 11:59 PM, or earlier if the deal ends). Tomorrow, get a new code. If the shop refuses a code, report it under My Deals.

Gallery

Questions & Answers

Common questions

  • Where is Two Wheeler Engineering located?

    Two Wheeler Engineering is in Attibele, Bengaluru. The address on record is Mayura Engineering, IIndlabele, Sarjapura - Attibele Rd.

  • How can I contact Two Wheeler Engineering?

    Call or WhatsApp on the number shown on this page, or use Get Quote to send your requirement through LocalSaathi.

  • What should I ask a two-wheeler repair workshop before deciding?

    Ask for an estimate before work starts, whether parts are genuine, whether there is a warranty on the repair, and when the vehicle will be ready.

  • Is Two Wheeler Engineering verified by LocalSaathi?

    Not yet. The details come from public business information and the owner has not claimed this listing, so please confirm them directly with the business.

  • Can I bring my own engine oil or spare parts to Two Wheeler Engineering?

    Some shops fit oil or parts brought by the rider and charge only labour, while others prefer to use their own stock so they can stand behind the work. Please ask Two Wheeler Engineering whether they fit customer parts and how labour is charged.

  • What work does a two-wheeler service shop like Two Wheeler Engineering usually handle?

    Shops of this kind usually do general service, oil changes, brake and clutch work, chain and sprocket sets, puncture repair, battery and wiring jobs and small engine repairs. The exact list depends on the shop, so please ask Two Wheeler Engineering about the job your bike or scooter needs.

  • Are the mechanics at Two Wheeler Engineering trained to work on my model?

    Local mechanics often handle many makes, though fuel injected bikes, bigger motorcycles and electric scooters may need particular tools and know-how. Whether the mechanics at Two Wheeler Engineering are trained for your model is not confirmed here, so please ask Two Wheeler Engineering.

  • Does Two Wheeler Engineering service bikes above 300 cc?

    Bigger motorcycles often need particular oil, tools and parts, and some local shops prefer not to take them. Whether Two Wheeler Engineering works on bikes above 300 cc is not confirmed here. Please ask Two Wheeler Engineering about your model before visiting.

Customer questions

No customer questions yet. Ask the business below.

Customer Reviews

Contact & Location

Address

Mayura Engineering, IIndlabele, Sarjapura - Attibele Rd, Attibele

Bengaluru, Karnataka 562107

Share this page

Know someone who needs Two Wheeler Engineering? Send them this page.

https://www.localsaathi.in/business/two-wheeler-engineering-attibele-bengaluru
Scan to open this page
Newsletter · Weekly drop

Get Deals & Updates

Weekly deals, new service launches, and expert tips — straight to your inbox.

No spam, ever. Unsubscribe in one click.