Skip to main content
Techno Craft Bike Service, Two Wheeler Mechanics in Basaveshwar Nagar, Bengaluru
1 / 1
Automobiles

Techno Craft Bike Service

Basaveshwar Nagar, Bengaluru
Not verified Claimed

Live now:Today's deal

5% offyour bill

About

Techno Craft Bike Service is a two-wheeler repair workshop in Basaveshwar Nagar, Bengaluru, Karnataka. The address on record is 41, 1st A Cross Rd, Mahatma Gandhi Nagar. You can call or WhatsApp on the number shown on this page, or send an enquiry through LocalSaathi. Vehicle workshops usually handle periodic servicing, engine and brake repairs, electrical faults and parts replacement, for one brand or for many. Before you decide: ask for an estimate before work starts, whether parts are genuine, whether there is a warranty on the repair, and when the vehicle will be ready. This listing is built from public business information and has not been verified by LocalSaathi or confirmed by the owner, so please check timings, services and charges directly with Techno Craft Bike Service. If this is your business, you can claim the listing to add your own photos, services and prices. Services listed for Techno Craft Bike Service include disc brake pad change, engine oil change and clutch plate replacement. Apart from repairs, shops like this often handle small jobs that riders keep putting off, such as changing a broken mirror, replacing a worn grip, fixing a loose side stand, or swapping a dim bulb. These usually take only a few minutes when the part is in stock. If your bike will not start, check the fuel, the kill switch and the side stand switch before calling Techno Craft Bike Service. Describe whether the self-start clicks, the kick feels hard or nothing happens at all. Mechanics can sometimes guess the cause over the phone and tell you what to bring in.

Key Business Highlights

Deals today

1

Credentials & Certifications

LocalSaathi verification

Not verified yet

Awarded only after document verification

Services & Prices

  • Chain and sprocket kit replacement

    From β‚Ή1,800 / set

    Approx. price Β· confirm with the business

    The chain, front sprocket and rear sprocket are replaced together, as a new chain on worn sprockets wears out fast. Signs include a chain that keeps going loose, hooked teeth and a grinding noise. Prices vary with the bike model and kit chosen.

  • Disc brake pad replacement

    From β‚Ή1,200 / wheel

    Approx. price Β· confirm with the business

    Worn disc pads are replaced and the calliper is cleaned so the new pads sit evenly. A squeal, grinding noise or a lever that travels too far are common signs. Brake fluid level is also checked, and topped up or changed if it looks dark.

  • Fuel injector and throttle body cleaning

    From β‚Ή600 / job

    Approx. price Β· confirm with the business

    Bikes and scooters with fuel injection can idle rough or hesitate when the injector or throttle body gets dirty. These parts are cleaned and the system is reset with a scan tool where needed. Not every shop has the tools for this.

  • Headlight, indicator and horn repair

    From β‚Ή900 / job

    Approx. price Β· confirm with the business

    Covers dead bulbs, a weak or silent horn, indicators that blink too fast, and loose or wet connectors. The mechanic traces the fault through the switch, fuse and wiring, then repairs or replaces the part. Water entry in the monsoon is a common cause.

  • Spark plug replacement

    From β‚Ή400 / plug

    Approx. price Β· confirm with the business

    A worn spark plug can cause hard starting, misfiring, jerks and poor mileage. The old plug is removed, the gap on the new one is checked, and it is fitted to the right tightness. Some bikes use two plugs, which raises the cost.

  • Wash and polish

    From β‚Ή300 / wash

    Approx. price Β· confirm with the business

    The bike or scooter is washed with water and shampoo, wiped dry, and the painted parts are polished. The chain is usually lubricated after the wash so it does not rust. Some shops use a pressure washer, so ask them to avoid spraying the electrical parts.

More services

Carburettor cleaning

Carburettor cleaning

Time varies
Clutch plate replacement

Clutch plate replacement

Time varies
Disc brake pad change

Disc brake pad change

Time varies
Engine oil change

Engine oil change

Time varies
General bike service

General bike service

Time varies
Puncture repair

Puncture repair

Time varies

Hot Deals

1 live now

New codes every day Β· valid till 11:59 PM

Today's deal Offer of the day20 of 20 left today

5% off your bill

Valid all day today

Terms: 5% off the total bill. Code valid today only. Get a new code each day. One code per customer per deal per day. Cannot be combined with other offers unless the shop says so.

Share

Your code Β· Techno Craft Bike Service

Tap Get code to unlock

Free Single use Valid today

Codes are single-use and valid today only (till 11:59 PM, or earlier if the deal ends). Tomorrow, get a new code. If the shop refuses a code, report it under My Deals.

Gallery

Questions & Answers

Common questions

  • Where is Techno Craft Bike Service located?

    Techno Craft Bike Service is in Basaveshwar Nagar, Bengaluru. The address on record is 41, 1st A Cross Rd, Mahatma Gandhi Nagar.

  • How can I contact Techno Craft Bike Service?

    Call or WhatsApp on the number shown on this page, or use Get Quote to send your requirement through LocalSaathi.

  • What should I ask a two-wheeler repair workshop before deciding?

    Ask for an estimate before work starts, whether parts are genuine, whether there is a warranty on the repair, and when the vehicle will be ready.

  • Is Techno Craft Bike Service verified by LocalSaathi?

    Not yet. The details come from public business information and the owner has not claimed this listing, so please confirm them directly with the business.

  • Can Techno Craft Bike Service send a mechanic if my bike breaks down on the road?

    Some local mechanics come out for punctures, battery trouble or small faults nearby, while others ask you to bring the bike in. Whether Techno Craft Bike Service provides roadside or emergency help is not confirmed here, so please ask Techno Craft Bike Service before you need it.

  • How often should the bike chain be cleaned and lubricated?

    A chain usually needs cleaning and lubrication every 500 to 1,000 km, and sooner after riding in rain or dust. Chain slack should also be checked. A dry or loose chain wears out sprockets faster. Please ask Techno Craft Bike Service to adjust it during service.

  • What should I check when I collect my bike after service?

    Check that the brakes grip well, the clutch and gears feel smooth, the chain is not too loose, and the lights, horn and indicators work. Look at the bill against the estimate. Please mention any problem to Techno Craft Bike Service before you ride away.

  • How often should a bike or scooter be serviced?

    Most commuter bikes and scooters need a service every 2,500 to 3,500 km or every three to four months, but the owner's manual for your model is the final guide. Riding mostly in heavy traffic may mean more frequent oil changes. You can ask Techno Craft Bike Service what is due.

Customer questions

No customer questions yet. Ask the business below.

Customer Reviews

Contact & Location

Address

41, 1st A Cross Rd, Mahatma Gandhi Nagar, Basaveshwar Nagar

Bengaluru, Karnataka 560079

Share this page

Know someone who needs Techno Craft Bike Service? Send them this page.

https://www.localsaathi.in/business/techno-craft-bike-service-basaveshwar-nagar-bengaluru
Scan to open this page
Newsletter Β· Weekly drop

Get Deals & Updates

Weekly deals, new service launches, and expert tips β€” straight to your inbox.

No spam, ever. Unsubscribe in one click.

Techno Craft Bike Service β€” Basaveshwar Nagar