Skip to main content
Tansi Honda Service, Two Wheeler Mechanics in Marathahalli, Bengaluru
1 / 1
Automobiles

Tansi Honda Service

Marathahalli, Bengaluru
Not verified Claimed

Live now:Today's deal

5% offyour bill

About

Tansi Honda Service is a two-wheeler repair workshop in Marathahalli, Bengaluru, Karnataka. The address on record is 94, Ring Road Outer Ring Road, Marathahalli - Sarjapur Outer Ring Rd, Chandra Layout. You can call or WhatsApp on the number shown on this page, or send an enquiry through LocalSaathi. Vehicle workshops usually handle periodic servicing, engine and brake repairs, electrical faults and parts replacement, for one brand or for many. Before you decide: ask for an estimate before work starts, whether parts are genuine, whether there is a warranty on the repair, and when the vehicle will be ready. This listing is built from public business information and has not been verified by LocalSaathi or confirmed by the owner, so please check timings, services and charges directly with Tansi Honda Service. If this is your business, you can claim the listing to add your own photos, services and prices. Services listed for Tansi Honda Service include engine overhaul, disc brake pad change and fork oil seal replacement. A two-wheeler service shop usually starts by listening to the problem, such as a noise, poor pickup, low mileage or starting trouble. The mechanic may take a short test ride and check the spark plug, air filter and fuel supply first, as these simple parts cause many common complaints. Plan your visit to Tansi Honda Service around the job. An oil change or puncture fix usually takes under an hour, a general service a few hours, and clutch or engine work can take a day or more if parts must be ordered. Ask when to expect the bike back and whether they will message you.

View Company Profile

Key Business Highlights

Deals today

1

Credentials & Certifications

LocalSaathi verification

Not verified yet

Awarded only after document verification

Services & Prices

  • Carburettor cleaning and tuning

    From β‚Ή500 / job

    Approx. price Β· confirm with the business

    The carburettor is removed, opened and cleaned of dirt and varnish, then refitted and tuned for a steady idle and smooth pickup. It helps with stalling, poor mileage and hard starting on older bikes. Worn gaskets or needles may be changed at extra cost.

  • Chain and sprocket kit replacement

    From β‚Ή1,600 / set

    Approx. price Β· confirm with the business

    The chain, front sprocket and rear sprocket are replaced together, as a new chain on worn sprockets wears out fast. Signs include a chain that keeps going loose, hooked teeth and a grinding noise. Prices vary with the bike model and kit chosen.

  • Chain cleaning, lubrication and adjustment

    From β‚Ή210 / job

    Approx. price Β· confirm with the business

    The chain is cleaned of mud and old grease, lubricated with chain spray, and adjusted to the right slack. Doing this every 500 to 1,000 km, and after rain, helps the chain and sprockets last longer and keeps the ride smooth and quiet.

  • General service for a scooter

    From β‚Ή900 / service

    Approx. price Β· confirm with the business

    Includes an engine oil change, air filter cleaning, brake shoe adjustment and a check of the drive belt, rollers and battery. The variator area is often cleaned of dust, which helps smooth pickup. A wash is usually done at the end of the service.

  • Self-start motor repair

    From β‚Ή700 / job

    Approx. price Β· confirm with the business

    When the self-start clicks, turns slowly or does nothing while the battery is fine, the starter motor or relay may be at fault. The motor is removed, its brushes and gear are checked, and worn parts are replaced or the unit is changed.

  • Wash and polish

    From β‚Ή300 / wash

    Approx. price Β· confirm with the business

    The bike or scooter is washed with water and shampoo, wiped dry, and the painted parts are polished. The chain is usually lubricated after the wash so it does not rust. Some shops use a pressure washer, so ask them to avoid spraying the electrical parts.

More services

Battery replacement

Battery replacement

Time varies
Carburettor cleaning

Carburettor cleaning

Time varies
Clutch plate replacement

Clutch plate replacement

Time varies
Disc brake pad change

Disc brake pad change

Time varies
Engine overhaul

Engine overhaul

Time varies
Fork oil seal replacement

Fork oil seal replacement

Time varies

Hot Deals

1 live now

New codes every day Β· valid till 11:59 PM

Today's deal Offer of the day20 of 20 left today

5% off your bill

Valid all day today

Terms: 5% off the total bill. Code valid today only. Get a new code each day. One code per customer per deal per day. Cannot be combined with other offers unless the shop says so.

Share

Your code Β· Tansi Honda Service

Tap Get code to unlock

Free Single use Valid today

Codes are single-use and valid today only (till 11:59 PM, or earlier if the deal ends). Tomorrow, get a new code. If the shop refuses a code, report it under My Deals.

Gallery

Questions & Answers

Common questions

  • Where is Tansi Honda Service located?

    Tansi Honda Service is in Marathahalli, Bengaluru. The address on record is 94, Ring Road Outer Ring Road, Marathahalli - Sarjapur Outer Ring Rd, Chandra Layout.

  • How can I contact Tansi Honda Service?

    Call or WhatsApp on the number shown on this page, or use Get Quote to send your requirement through LocalSaathi.

  • What should I ask a two-wheeler repair workshop before deciding?

    Ask for an estimate before work starts, whether parts are genuine, whether there is a warranty on the repair, and when the vehicle will be ready.

  • Is Tansi Honda Service verified by LocalSaathi?

    Not yet. The details come from public business information and the owner has not claimed this listing, so please confirm them directly with the business.

  • What are the usual working hours of Tansi Honda Service?

    Most two-wheeler shops in Marathahalli, Bengaluru open in the morning and work till evening, and some close one day a week or for a few hours in the afternoon. Hours can change on holidays, so please call or WhatsApp Tansi Honda Service to confirm today's timings.

  • How often should the bike chain be cleaned and lubricated?

    A chain usually needs cleaning and lubrication every 500 to 1,000 km, and sooner after riding in rain or dust. Chain slack should also be checked. A dry or loose chain wears out sprockets faster. Please ask Tansi Honda Service to adjust it during service.

  • Why is my bike giving lower mileage than before?

    Lower mileage is often linked to a dirty air filter, worn spark plug, low tyre pressure, a tight brake, a dry chain or a carburettor that needs tuning. Riding style and traffic also matter. Please ask Tansi Honda Service to check these during the next service.

  • Does Tansi Honda Service sell accessories like helmets, covers or crash guards?

    Some two-wheeler shops keep a small stock of accessories such as helmets, covers, crash guards, mirrors and mobile holders, and can fit them on the spot. Whether Tansi Honda Service stocks or fits accessories is not confirmed here, so please ask Tansi Honda Service.

Customer questions

No customer questions yet. Ask the business below.

Customer Reviews

Contact & Location

Address

94, Ring Road Outer Ring Road, Marathahalli - Sarjapur Outer Ring Rd, Chandra Layout, Marathahalli

Bengaluru, Karnataka 560037

Share this page

Know someone who needs Tansi Honda Service? Send them this page.

https://www.localsaathi.in/business/tansi-honda-service-marathahalli-bengaluru
Scan to open this page
Newsletter Β· Weekly drop

Get Deals & Updates

Weekly deals, new service launches, and expert tips β€” straight to your inbox.

No spam, ever. Unsubscribe in one click.

Tansi Honda Service β€” Two Wheeler Mechanics in Marathahalli