Skip to main content
Suresh Bike Center, Two Wheeler Mechanics in Ramamurthy Nagar, Bengaluru
1 / 1
Automobiles

Suresh Bike Center

Ramamurthy Nagar, Bengaluru
Not verified Claimed

Live now:Today's deal

5% offyour bill

About

Suresh Bike Center is a two-wheeler repair workshop in Ramamurthy Nagar, Bengaluru, Karnataka. The address on record is Naganna Building, Saint Kanakadasa Road, Naganna Building, 9th B, Kalkere Main Road, Chandra Vadana Layout. You can call or WhatsApp on the number shown on this page, or send an enquiry through LocalSaathi. Vehicle workshops usually handle periodic servicing, engine and brake repairs, electrical faults and parts replacement, for one brand or for many. Before you decide: ask for an estimate before work starts, whether parts are genuine, whether there is a warranty on the repair, and when the vehicle will be ready. This listing is built from public business information and has not been verified by LocalSaathi or confirmed by the owner, so please check timings, services and charges directly with Suresh Bike Center. If this is your business, you can claim the listing to add your own photos, services and prices.

Key Business Highlights

Deals today

1

Credentials & Certifications

LocalSaathi verification

Not verified yet

Awarded only after document verification

Services & Prices

  • Carburettor cleaning and tuning

    From ₹600 / job

    Approx. price · confirm with the business

    The carburettor is removed, opened and cleaned of dirt and varnish, then refitted and tuned for a steady idle and smooth pickup. It helps with stalling, poor mileage and hard starting on older bikes. Worn gaskets or needles may be changed at extra cost.

  • Chain and sprocket kit replacement

    From ₹2,100 / set

    Approx. price · confirm with the business

    The chain, front sprocket and rear sprocket are replaced together, as a new chain on worn sprockets wears out fast. Signs include a chain that keeps going loose, hooked teeth and a grinding noise. Prices vary with the bike model and kit chosen.

  • Clutch plate replacement

    From ₹1,900 / job

    Approx. price · confirm with the business

    When the engine revs but the bike does not pick up speed, the clutch plates are often worn. The clutch cover is opened, the friction plates and springs are replaced as needed, and fresh oil is filled. The job usually takes a few hours.

  • Fuel injector and throttle body cleaning

    From ₹1,500 / job

    Approx. price · confirm with the business

    Bikes and scooters with fuel injection can idle rough or hesitate when the injector or throttle body gets dirty. These parts are cleaned and the system is reset with a scan tool where needed. Not every shop has the tools for this.

  • New tyre with fitting

    From ₹1,600 / tyre

    Approx. price · confirm with the business

    A worn tyre is replaced with a new one of the size marked on the sidewall, and the wheel is balanced or checked for wobble. Tyres are usually due when the tread is near the wear marks or the rubber shows cracks. Prices depend on size and type.

  • Self-start motor repair

    From ₹600 / job

    Approx. price · confirm with the business

    When the self-start clicks, turns slowly or does nothing while the battery is fine, the starter motor or relay may be at fault. The motor is removed, its brushes and gear are checked, and worn parts are replaced or the unit is changed.

More services

Carburettor cleaning

Carburettor cleaning

Time varies
Clutch plate replacement

Clutch plate replacement

Time varies
Engine overhaul

Engine overhaul

Time varies
General bike service

General bike service

Time varies
Puncture repair

Puncture repair

Time varies
Scooter general service

Scooter general service

Time varies

Hot Deals

1 live now

New codes every day · valid till 11:59 PM

Today's deal Offer of the day20 of 20 left today

5% off your bill

Valid all day today

Terms: 5% off the total bill. Code valid today only. Get a new code each day. One code per customer per deal per day. Cannot be combined with other offers unless the shop says so.

Share

Your code · Suresh Bike Center

Tap Get code to unlock

Free Single use Valid today

Codes are single-use and valid today only (till 11:59 PM, or earlier if the deal ends). Tomorrow, get a new code. If the shop refuses a code, report it under My Deals.

Gallery

Questions & Answers

Common questions

  • Where is Suresh Bike Center located?

    Suresh Bike Center is in Ramamurthy Nagar, Bengaluru. The address on record is Naganna Building, Saint Kanakadasa Road, Naganna Building, 9th B, Kalkere Main Road, Chandra Vadana Layout.

  • How can I contact Suresh Bike Center?

    Call or WhatsApp on the number shown on this page, or use Get Quote to send your requirement through LocalSaathi.

  • What should I ask a two-wheeler repair workshop before deciding?

    Ask for an estimate before work starts, whether parts are genuine, whether there is a warranty on the repair, and when the vehicle will be ready.

  • Is Suresh Bike Center verified by LocalSaathi?

    Not yet. The details come from public business information and the owner has not claimed this listing, so please confirm them directly with the business.

  • How much does a puncture repair usually cost?

    In Bengaluru, a tubeless puncture repair at a local shop usually costs around Rs 80 to 200, and a tube puncture patch around Rs 100 to 300, depending on the wheel and the time of day. Please confirm the rate with Suresh Bike Center.

  • Is a free check-up available before service at Suresh Bike Center?

    Some shops look at the bike and tell you the likely cost without charge, while others charge once work begins. This page does not confirm what Suresh Bike Center does, so please ask Suresh Bike Center whether a free check-up is possible.

  • Does Suresh Bike Center pick up and drop bikes from home?

    Some two-wheeler shops in Bengaluru send someone to pick up and drop bikes, sometimes for a small charge and only in nearby areas. Whether Suresh Bike Center does this is not confirmed here, so please ask Suresh Bike Center directly.

  • Should I ask for an estimate before the work begins?

    Yes, it helps to ask for a rough estimate with parts and labour mentioned, and to ask the mechanic to call before fitting anything extra. This makes it easier to compare the final bill. Please ask Suresh Bike Center how they share estimates.

Customer questions

No customer questions yet. Ask the business below.

Customer Reviews

Contact & Location

Address

Naganna Building, Saint Kanakadasa Road, Naganna Building, 9th B, Kalkere Main Road, Chandra Vadana Layout, Ramamurthy Nagar

Bengaluru, Karnataka 560016

Share this page

Know someone who needs Suresh Bike Center? Send them this page.

https://www.localsaathi.in/business/suresh-bike-center-ramamurthy-nagar-bengaluru
Scan to open this page
Newsletter · Weekly drop

Get Deals & Updates

Weekly deals, new service launches, and expert tips — straight to your inbox.

No spam, ever. Unsubscribe in one click.

Suresh Bike Center — Ramamurthy Nagar