Skip to main content
Industrial & Manufacturing

Suguna & Texmo Motors and Pumps - PRAJA ENTERPRISES

Sudhama Nagar, Bengaluru
Not verified Claimed

Live now:Today's deal

5% offyour bill

About

Suguna & Texmo Motors and Pumps - PRAJA ENTERPRISES is an industrial machinery business in Sudhama Nagar, Bengaluru, Karnataka. The address on record is 19 1st Main 1st Cross Road, Elegance Garden Appartment, Mission Rd, Srinivas Colony. You can call Suguna & Texmo Motors and Pumps - PRAJA ENTERPRISES on the landline number shown on this page, or use the map for directions. Local businesses in this line of work can differ widely in what they offer, what they charge and how soon they can serve you. Before you decide: ask exactly what is included, the full price with any extra charges, the time it will take, and what happens if you are not satisfied. This listing is built from public business information and has not been verified by LocalSaathi or confirmed by the owner, so please check timings, services and charges directly with Suguna & Texmo Motors and Pumps - PRAJA ENTERPRISES. If this is your business, you can claim the listing to add your own photos, services and prices.

Key Business Highlights

Deals today

1

Credentials & Certifications

LocalSaathi verification

Not verified yet

Awarded only after document verification

Services & Prices

  • Gas cutting of steel plate

    From ₹40 / running metre

    Approx. price · confirm with the business

    Gas cutting is used for thick mild steel plates and sections, such as base plates, flanges and heavy brackets. It is charged per running metre of cut, per piece or per hour, depending on plate thickness. Edges often need grinding afterwards.

  • MS gate and grill fabrication

    From ₹650 / sq ft

    Approx. price · confirm with the business

    Main gates, sliding gates, window grills and railings in mild steel pipe, square tube or flat bar, made to site measurements. Usually priced per square foot with material, primer and paint. Design, steel weight and fitting at site change the rate.

  • Mezzanine floor fabrication

    From ₹450 / sq ft

    Approx. price · confirm with the business

    Steel mezzanine floors for factories, warehouses and shops, built with columns, beams and a deck of chequered plate or boards. It is priced per square foot, based on load, height and stair needs. The design is usually agreed on a drawing first.

  • Stainless steel fabrication

    From ₹550 / kg

    Approx. price · confirm with the business

    Fabrication of stainless steel tables, trolleys, tanks, racks, railings and machine guards, usually in SS 304 or SS 202 sheet and pipe. Rate per kg includes material, TIG welding and a buffed or matt finish. Grade and finish change the price a lot.

  • TIG welding for stainless steel

    From ₹1,000 / hour

    Approx. price · confirm with the business

    TIG welding gives neat, controlled welds on stainless steel, aluminium and thin sheet, and is common for kitchen equipment, railings and pipe work. It is slower than arc or MIG, so it is usually charged per hour or per joint, with argon included.

  • VMC milling job work

    From ₹1,200 / machine hour

    Approx. price · confirm with the business

    Milling of faces, slots, pockets and drilled hole patterns on a vertical machining centre, used for plates, housings, fixtures and brackets. Rate is per machine hour, depending on machine size and the accuracy needed. Programming time may be added for new parts.

More services

Gate and grill work

Gate and grill work

Time varies
Laser cutting of sheets

Laser cutting of sheets

Time varies
Lathe job work

Lathe job work

Time varies
Machine repair visit

Machine repair visit

Time varies
Mild steel fabrication

Mild steel fabrication

Time varies
Shed structure fabrication

Shed structure fabrication

Time varies

Hot Deals

1 live now

New codes every day · valid till 11:59 PM

Today's deal Offer of the day20 of 20 left today

5% off your bill

Valid all day today

Terms: 5% off the total bill. Code valid today only. Get a new code each day. One code per customer per deal per day. Cannot be combined with other offers unless the shop says so.

Share

Your code · Suguna & Texmo Motors and Pumps - PRAJA ENTERPRISES

Tap Get code to unlock

Free Single use Valid today

Codes are single-use and valid today only (till 11:59 PM, or earlier if the deal ends). Tomorrow, get a new code. If the shop refuses a code, report it under My Deals.

Gallery

What Suguna & Texmo Motors and Pumps - PRAJA ENTERPRISES offers

Questions & Answers

Common questions

  • Where is Suguna & Texmo Motors and Pumps - PRAJA ENTERPRISES located?

    Suguna & Texmo Motors and Pumps - PRAJA ENTERPRISES is in Sudhama Nagar, Bengaluru. The address on record is 19 1st Main 1st Cross Road, Elegance Garden Appartment, Mission Rd, Srinivas Colony.

  • How can I contact Suguna & Texmo Motors and Pumps - PRAJA ENTERPRISES?

    Call the landline number shown on this page, or use Directions to visit.

  • What should I ask an industrial machinery business before deciding?

    Ask exactly what is included, the full price with any extra charges, the time it will take, and what happens if you are not satisfied.

  • Is Suguna & Texmo Motors and Pumps - PRAJA ENTERPRISES verified by LocalSaathi?

    Not yet. The details come from public business information and the owner has not claimed this listing, so please confirm them directly with the business.

  • Does Suguna & Texmo Motors and Pumps - Praja Enterprises sell industrial machines or only do job work?

    Businesses listed under industrial machinery may sell new or used machines, supply spares, repair equipment or do job work, and some do more than one. Please call or WhatsApp Suguna & Texmo Motors and Pumps - Praja Enterprises to confirm whether they sell machines, provide service or take up job work.

  • Does Suguna & Texmo Motors and Pumps - Praja Enterprises arrange transport for finished parts?

    Some workshops dispatch finished parts in their own vehicle or through a local transporter and add the cost to the bill, while others expect customers to collect. Heavy fabricated items may need a crane or loading help. Please ask Suguna & Texmo Motors and Pumps - Praja Enterprises how dispatch and loading are handled.

  • How is sheet bending or press brake work charged?

    Press brake bending is often charged per bend, roughly Rs 5 to 25 per bend depending on sheet thickness, length and quantity, or included in a rate per kg for finished sheet metal parts. Please ask Suguna & Texmo Motors and Pumps - Praja Enterprises for a rate based on your drawing.

  • What does CNC turning or VMC job work usually cost?

    CNC turning in Bengaluru is often charged around Rs 400 to 1,200 per machine hour and VMC milling around Rs 600 to 1,800, or converted into a rate per piece for batches. Please share your drawing and quantity with Suguna & Texmo Motors and Pumps - Praja Enterprises to get an actual rate.

Customer questions

No customer questions yet. Ask the business below.

Customer Reviews

Contact & Location

Address

19 1st Main 1st Cross Road, Elegance Garden Appartment, Mission Rd, Srinivas Colony, Sudhama Nagar

Bengaluru, Karnataka 560027

Share this page

Know someone who needs Suguna & Texmo Motors and Pumps - PRAJA ENTERPRISES? Send them this page.

https://www.localsaathi.in/business/suguna-and-texmo-motors-and-pumps-praja-enterprises-sudhama-nagar-bengaluru
Scan to open this page
Newsletter · Weekly drop

Get Deals & Updates

Weekly deals, new service launches, and expert tips — straight to your inbox.

No spam, ever. Unsubscribe in one click.

Suguna & Texmo Motors and Pumps - PRAJA ENTERPRISES