Skip to main content
Sri Prashanth Electricals, Electrician in Banashankari, Bengaluru
1 / 1
Home Services
Sri Prashanth Electricals

Sri Prashanth Electricals

Banashankari, Bengaluru
Not verified Claimed

Live now:Today's deal

5% offyour bill

About

Sri Prashanth Electricals is an electrician in Banashankari, Bengaluru, Karnataka. The address on record is 20, 17th Cross Rd, Thimmarayagowda Layout, Ittamadu, Banashankari 3rd Stage. You can call or WhatsApp on the number shown on this page, or send an enquiry through LocalSaathi. Electricians usually handle wiring, switches, fans, lights, fault-finding and small installations for homes, shops and offices. Before you decide: ask for the visit charge, a price before work begins, whether materials are included, and whether the work comes with any guarantee. This listing is built from public business information and has not been verified by LocalSaathi or confirmed by the owner, so please check timings, services and charges directly with Sri Prashanth Electricals. If this is your business, you can claim the listing to add your own photos, services and prices. Services listed for Sri Prashanth Electricals include electrician, geyser installation and fault finding. Inverter and battery setup is common in parts of Bengaluru with power cuts. A home electrical service usually installs the inverter, connects the battery, and separates the circuits that should run on backup, such as a few lights, fans and the router, from heavy loads like geysers and ACs. Once the job is done, test every point before the electrician from Sri Prashanth Electricals leaves. Switch fans to all speeds, turn lights on and off, plug a phone charger into new sockets, and reset the MCB once to check it holds. Ask for a written bill listing the work done and parts used.

View Company Profile

Key Business Highlights

Deals today

1

Credentials & Certifications

LocalSaathi verification

Not verified yet

Awarded only after document verification

Services & Prices

  • Ceiling fan repair

    From ₹230 / fan

    Approx. price · confirm with the business

    Common fan problems include slow speed, humming, wobbling, noise or a fan that does not start. The electrician usually checks the capacitor, regulator, bearings and wiring, and balances the blades. Motor winding repairs may need the fan taken to a workshop.

  • Chandelier installation

    From ₹1,000 / fitting

    Approx. price · confirm with the business

    Chandeliers and large hanging lights are assembled, hung from a strong hook or ceiling plate, wired and balanced. Heavy fittings and double height ceilings may need extra hands, a tall ladder or scaffolding, which raises the charge. Fitting many crystal pieces also adds time.

  • Earth pit installation

    From ₹3,400 / pit

    Approx. price · confirm with the business

    A new earth pit is dug, an earth electrode and filling material are placed, and an earth wire is run to the main board. Earthing helps reduce the risk of shocks from metal appliances. Cost depends on depth, electrode type and wire length.

  • Electrician visit and inspection

    From ₹240 / visit

    Approx. price · confirm with the business

    A basic visit where the electrician checks the problem, such as a dead socket, tripping MCB or flickering light, and explains the fault and the cost of fixing it. Many electricians adjust this charge against the repair if you go ahead. Parts are priced separately.

  • Tube light or LED batten fitting

    From ₹220 / light

    Approx. price · confirm with the business

    A new tube light, LED batten or LED panel is fixed to the wall or ceiling, connected to the existing point and tested. Swapping old tube lights with chokes for LED battens is a common request. The light itself is usually bought separately or added to the bill.

  • Wall or pendant light fitting

    From ₹500 / light

    Approx. price · confirm with the business

    Wall lights, mirror lights, pendant lights and spotlights are fixed in place, connected to an existing or new point and tested. If there is no wire at the spot, a new line is run through casing or the wall, usually at extra cost. Outdoor lights need weather sealing.

More services

Earthing work

Earthing work

Time varies
Geyser installation

Geyser installation

Time varies
Light fitting

Light fitting

Time varies
New wiring points

New wiring points

Time varies
Switch and socket repair

Switch and socket repair

Time varies

Hot Deals

1 live now

New codes every day · valid till 11:59 PM

Today's deal Offer of the day20 of 20 left today

5% off your bill

Valid all day today

Terms: 5% off the total bill. Code valid today only. Get a new code each day. One code per customer per deal per day. Cannot be combined with other offers unless the shop says so.

Share

Your code · Sri Prashanth Electricals

Tap Get code to unlock

Free Single use Valid today

Codes are single-use and valid today only (till 11:59 PM, or earlier if the deal ends). Tomorrow, get a new code. If the shop refuses a code, report it under My Deals.

Gallery

Questions & Answers

Common questions

  • Where is Sri Prashanth Electricals located?

    Sri Prashanth Electricals is in Banashankari, Bengaluru. The address on record is 20, 17th Cross Rd, Thimmarayagowda Layout, Ittamadu, Banashankari 3rd Stage.

  • How can I contact Sri Prashanth Electricals?

    Call or WhatsApp on the number shown on this page, or use Get Quote to send your requirement through LocalSaathi.

  • What should I ask an electrician before deciding?

    Ask for the visit charge, a price before work begins, whether materials are included, and whether the work comes with any guarantee.

  • Is Sri Prashanth Electricals verified by LocalSaathi?

    Not yet. The details come from public business information and the owner has not claimed this listing, so please confirm them directly with the business.

  • How much does home automation for one room usually cost?

    In Bengaluru, automating lights and fans in one room with smart switches often costs around Rs 3,000 to 15,000, depending on the number of switches, the type of modules and whether a hub is needed. Please ask Sri Prashanth Electricals for an estimate based on your rooms.

  • Do smart switches need changes to my wiring?

    Many smart switches fit into existing switchboards, but some need a neutral wire at the board, which older homes may not have. Larger systems may need a hub. Please ask Sri Prashanth Electricals to check your boards before you buy smart switches.

  • Can Sri Prashanth Electricals help with a new meter or load increase?

    A new meter or a load increase usually needs an application to the electricity supply company, often filed with help from a registered electrical contractor. Please ask Sri Prashanth Electricals whether they handle this paperwork, and what documents and fees are involved.

  • Why does my MCB keep tripping?

    An MCB usually trips because of an overloaded circuit, a short circuit, a faulty appliance or moisture in a switch or socket. Note when it trips and what is running at the time. Please ask Sri Prashanth Electricals about a visit to trace the cause, and confirm the visit charge first.

Customer questions

No customer questions yet. Ask the business below.

Customer Reviews

Contact & Location

Address

20, 17th Cross Rd, Thimmarayagowda Layout, Ittamadu, Banashankari 3rd Stage, Banashankari

Bengaluru, Karnataka 560085

Share this page

Know someone who needs Sri Prashanth Electricals? Send them this page.

https://www.localsaathi.in/business/sri-prashanth-electricals-banashankari-bengaluru
Scan to open this page
Newsletter · Weekly drop

Get Deals & Updates

Weekly deals, new service launches, and expert tips — straight to your inbox.

No spam, ever. Unsubscribe in one click.

Sri Prashanth Electricals — Electrician in Banashankari