Skip to main content
Construction & Real Estate

SA Electrical

RT Nagar, Bengaluru
Not verified Claimed

Live now:Today's deal

5% offyour bill

About

SA Electrical is an electrical contractors business in RT Nagar, Bengaluru, Karnataka. The address on record is 600, 21st Cross Rd, 1st Block, Kanaka Nagar. You can call or WhatsApp on the number shown on this page, or send an enquiry through LocalSaathi. Local businesses in this line of work can differ widely in what they offer, what they charge and how soon they can serve you. Before you decide: ask exactly what is included, the full price with any extra charges, the time it will take, and what happens if you are not satisfied. This listing is built from public business information and has not been verified by LocalSaathi or confirmed by the owner, so please check timings, services and charges directly with SA Electrical. If this is your business, you can claim the listing to add your own photos, services and prices. The listing for SA Electrical names AC point wiring, geyser installation and distribution board fitting. Fault finding is a big part of the trade: tracing why an MCB keeps tripping, why one room has no power, or why a socket heats up. Electricians usually test each circuit, check joints and connections, and replace the faulty wire, switch or breaker once the cause is found. Electrical work needs the power turned off for parts of the house. When SA Electrical or any electrician visits, show them where the main switch and distribution board are, and keep a torch handy. Move furniture away from the work area and keep children and pets in another room.

View Company Profile

Key Business Highlights

Deals today

1

Credentials & Certifications

LocalSaathi verification

Not verified yet

Awarded only after document verification

Services & Prices

  • Distribution board installation

    From โ‚น3,700 / board

    Approx. price ยท confirm with the business

    A new distribution board is fixed, with the incoming supply, MCBs for each circuit and an RCCB, then old circuits are moved over and labelled. Rates depend on the number of ways, single or three phase supply, and the breakers chosen.

  • House rewiring

    From โ‚น130 / sq ft

    Approx. price ยท confirm with the business

    Old wires are pulled out and replaced with new copper wires through existing or new conduits, with switch plates, boxes and the distribution board updated. Rates depend on wire size, switch range, wall chasing and the number of points in each room.

  • Light fixture installation

    From โ‚น350 / fixture

    Approx. price ยท confirm with the business

    LED panels, tube lights, wall lights, pendants and chandeliers are fixed and connected to the existing point. Heavier fittings need stronger hooks or anchors. Rates rise for high ceilings, many small lights in one fitting, or decorative fixtures that take longer.

  • Panel board upkeep visit

    From โ‚น3,700 / visit

    Approx. price ยท confirm with the business

    For apartments and commercial buildings, panels are shut down in a planned slot, cleaned, connections tightened, breakers checked and earthing tested. A short note of findings is often shared. Rates depend on the panel size and the number of feeders.

  • RCCB fitting in main board

    From โ‚น4,500 / unit

    Approx. price ยท confirm with the business

    A residual current circuit breaker is added to the main board to cut power when current leaks to earth, such as through a faulty appliance. The board may need rearranging to fit it. Cost covers the device and labour, varying with rating and poles.

  • Three phase connection wiring

    From โ‚น9,400 / job

    Approx. price ยท confirm with the business

    Wiring takes a three phase supply from the meter to a new board, balancing circuits across phases and connecting heavy loads like pumps and large ACs. The supply application is made with the power company separately. Rates depend on cable length and board size.

More services

Earthing pit

Earthing pit

Time varies
EV charger wiring

EV charger wiring

Time varies
Fan and light fitting

Fan and light fitting

Time varies
Geyser installation

Geyser installation

Time varies
MCB and RCCB work

MCB and RCCB work

Time varies
Pump starter wiring

Pump starter wiring

Time varies

Hot Deals

1 live now

New codes every day ยท valid till 11:59 PM

Today's deal Offer of the day20 of 20 left today

5% off your bill

Valid all day today

Terms: 5% off the total bill. Code valid today only. Get a new code each day. One code per customer per deal per day. Cannot be combined with other offers unless the shop says so.

Share

Your code ยท SA Electrical

Tap Get code to unlock

Free Single use Valid today

Codes are single-use and valid today only (till 11:59 PM, or earlier if the deal ends). Tomorrow, get a new code. If the shop refuses a code, report it under My Deals.

Gallery

What SA Electrical offers

Questions & Answers

Common questions

  • Where is SA Electrical located?

    SA Electrical is in RT Nagar, Bengaluru. The address on record is 600, 21st Cross Rd, 1st Block, Kanaka Nagar.

  • How can I contact SA Electrical?

    Call or WhatsApp on the number shown on this page, or use Get Quote to send your requirement through LocalSaathi.

  • What should I ask an electrical contractors business before deciding?

    Ask exactly what is included, the full price with any extra charges, the time it will take, and what happens if you are not satisfied.

  • Is SA Electrical verified by LocalSaathi?

    Not yet. The details come from public business information and the owner has not claimed this listing, so please confirm them directly with the business.

  • Can SA Electrical install a geyser or water heater?

    Electricians usually fit geysers on the wall, connect the inlet and outlet with plumbing help if needed, and run a suitable line from the board. Fitting labour in Bengaluru is often Rs 400 to 1,200. Whether SA Electrical takes this work is not confirmed here, so please ask.

  • Why does my MCB keep tripping?

    An MCB usually trips because of overload from too many appliances on one circuit, a short circuit, a loose or damaged wire, or a faulty appliance. An RCCB trips for current leakage. Please switch off heavy appliances and ask SA Electrical to trace the fault.

  • What is the usual visiting charge for an electrician?

    In Bengaluru, a visiting charge for a home electrician is often around Rs 200 to 500, sometimes adjusted against the work if you go ahead. Parts are extra. Please confirm the visiting charge and labour rates with SA Electrical before the visit.

  • Can SA Electrical wire an inverter or home battery backup?

    Many electricians connect inverters and batteries and wire selected lights and fans to them through a changeover. Labour usually costs around Rs 500 to 1,500 in Bengaluru, more if new wiring is needed. Please ask SA Electrical whether they take up inverter wiring and their rate.

Customer questions

No customer questions yet. Ask the business below.

Customer Reviews

Contact & Location

Address

600, 21st Cross Rd, 1st Block, Kanaka Nagar, RT Nagar

Bengaluru, Karnataka 560045

Share this page

Know someone who needs SA Electrical? Send them this page.

https://www.localsaathi.in/business/sa-electrical-rt-nagar-bengaluru
Scan to open this page
Newsletter ยท Weekly drop

Get Deals & Updates

Weekly deals, new service launches, and expert tips โ€” straight to your inbox.

No spam, ever. Unsubscribe in one click.

SA Electrical โ€” Electrical Contractors in RT Nagar