Skip to main content
Ramdev Electricals, Electrician in Mahadevapura, Bengaluru
1 / 1
Home Services
Ramdev Electricals

Ramdev Electricals

Mahadevapura, Bengaluru
Not verified Claimed

Live now:Today's deal

5% offyour bill

About

Ramdev Electricals is an electrician in Mahadevapura, Bengaluru, Karnataka. The address on record is Seetharampalya - Hoodi Rd, Shivaji Nagar, Basavanna Nagar. You can call or WhatsApp on the number shown on this page, or send an enquiry through LocalSaathi. Electricians usually handle wiring, switches, fans, lights, fault-finding and small installations for homes, shops and offices. Before you decide: ask for the visit charge, a price before work begins, whether materials are included, and whether the work comes with any guarantee. This listing is built from public business information and has not been verified by LocalSaathi or confirmed by the owner, so please check timings, services and charges directly with Ramdev Electricals. If this is your business, you can claim the listing to add your own photos, services and prices. Services listed for Ramdev Electricals include MCB and DB work, new wiring points and smart switch installation. Inverter and battery setup is common in parts of Bengaluru with power cuts. A home electrical service usually installs the inverter, connects the battery, and separates the circuits that should run on backup, such as a few lights, fans and the router, from heavy loads like geysers and ACs. If a switchboard is sparking, smells burnt or feels hot, switch off the MCB for that circuit or the main switch before calling Ramdev Electricals. Do not touch wet switches or open the board yourself. Tell the electrician what happened just before the fault, such as a storm, a new appliance or a power surge.

Key Business Highlights

Deals today

1

Credentials & Certifications

LocalSaathi verification

Not verified yet

Awarded only after document verification

Services & Prices

  • Ceiling fan installation

    From ₹160 / fan

    Approx. price · confirm with the business

    A new ceiling fan is assembled, hung on the existing hook, wired to the regulator and tested at all speeds. Extra work, such as a new hook, a down rod for a high ceiling or moving the point, usually costs more. Removing an old fan may be charged separately.

  • Ceiling fan repair

    From ₹400 / fan

    Approx. price · confirm with the business

    Common fan problems include slow speed, humming, wobbling, noise or a fan that does not start. The electrician usually checks the capacitor, regulator, bearings and wiring, and balances the blades. Motor winding repairs may need the fan taken to a workshop.

  • Inverter and battery installation

    From ₹750 / set

    Approx. price · confirm with the business

    A home inverter is fixed in place, connected to its battery and wired so that chosen lights, fans and sockets run on backup during power cuts. The charge rises if separate backup wiring is needed across the house. Battery water and terminal checks are usually explained.

  • MCB replacement

    From ₹550 / MCB

    Approx. price · confirm with the business

    A faulty or often tripping MCB in the distribution board is replaced with a new one of the right rating. The electrician usually checks whether the trip came from an overloaded circuit or a fault elsewhere. The MCB part cost is usually added to the labour charge.

  • TV wall mount fitting

    From ₹600 / TV

    Approx. price · confirm with the business

    A TV wall bracket is fixed with suitable anchors, the TV is mounted and levelled, and cables are tidied. A socket behind the TV or a cable conduit may be added at extra cost. Larger TVs and hard walls such as stone cladding usually take more time.

  • Video doorbell installation

    From ₹1,100 / doorbell

    Approx. price · confirm with the business

    A video doorbell is fixed at the main door, connected to power or an existing bell wire, and linked to the home Wi-Fi and phone app. The electrician usually checks the signal near the door and the chime position inside. Running a new wire adds to the cost.

More services

Earthing work

Earthing work

Time varies
Fault finding

Fault finding

Time varies
Home automation setup

Home automation setup

Time varies
Inverter installation

Inverter installation

Time varies
New wiring points

New wiring points

Time varies
Switch and socket repair

Switch and socket repair

Time varies

Hot Deals

1 live now

New codes every day · valid till 11:59 PM

Today's deal Offer of the day20 of 20 left today

5% off your bill

Valid all day today

Terms: 5% off the total bill. Code valid today only. Get a new code each day. One code per customer per deal per day. Cannot be combined with other offers unless the shop says so.

Share

Your code · Ramdev Electricals

Tap Get code to unlock

Free Single use Valid today

Codes are single-use and valid today only (till 11:59 PM, or earlier if the deal ends). Tomorrow, get a new code. If the shop refuses a code, report it under My Deals.

Gallery

Questions & Answers

Common questions

  • Where is Ramdev Electricals located?

    Ramdev Electricals is in Mahadevapura, Bengaluru. The address on record is Seetharampalya - Hoodi Rd, Shivaji Nagar, Basavanna Nagar.

  • How can I contact Ramdev Electricals?

    Call or WhatsApp on the number shown on this page, or use Get Quote to send your requirement through LocalSaathi.

  • What should I ask an electrician before deciding?

    Ask for the visit charge, a price before work begins, whether materials are included, and whether the work comes with any guarantee.

  • Is Ramdev Electricals verified by LocalSaathi?

    Not yet. The details come from public business information and the owner has not claimed this listing, so please confirm them directly with the business.

  • How much does a new power point usually cost?

    Adding a new socket or switch point in Bengaluru usually costs around Rs 250 to 900 per point, depending on wire length, whether wiring is concealed or surface, and the parts used. Please check the rate with Ramdev Electricals.

  • What should I do if I get a mild shock from a switch or appliance?

    Stop using the switch or appliance, switch off its MCB, and keep others away from it. A mild shock often points to an earthing problem or damaged insulation. Call Ramdev Electricals or another electrician to check it before using that point again.

  • How much does home automation for one room usually cost?

    In Bengaluru, automating lights and fans in one room with smart switches often costs around Rs 3,000 to 15,000, depending on the number of switches, the type of modules and whether a hub is needed. Please ask Ramdev Electricals for an estimate based on your rooms.

  • What does an RCCB do and do I need one?

    An RCCB, also called an ELCB, switches off power when it senses current leaking to earth, which helps reduce the risk of electric shock. Many newer homes have one on the main board. Please ask Ramdev Electricals to check whether your board has one and what adding it would cost.

Customer questions

No customer questions yet. Ask the business below.

Customer Reviews

Contact & Location

Address

Seetharampalya - Hoodi Rd, Shivaji Nagar, Basavanna Nagar, Mahadevapura

Bengaluru, Karnataka 560048

Share this page

Know someone who needs Ramdev Electricals? Send them this page.

https://www.localsaathi.in/business/ramdev-electricals-mahadevapura-bengaluru
Scan to open this page
Newsletter · Weekly drop

Get Deals & Updates

Weekly deals, new service launches, and expert tips — straight to your inbox.

No spam, ever. Unsubscribe in one click.

Ramdev Electricals — Electrician in Mahadevapura, Bengaluru