Skip to main content
PVS Bike Tech, Two Wheeler Mechanics in Jeevan Bima Nagar, Bengaluru
1 / 1
Automobiles
Not verified Claimed

Live now:Today's deal

5% offyour bill

About

PVS Bike Tech is a two-wheeler repair workshop in Jeevan Bima Nagar, Bengaluru, Karnataka. The address on record is 1048, 10th Main Rd, LIC Colony, HAL 3rd Stage, Sector 11. You can call or WhatsApp on the number shown on this page, or send an enquiry through LocalSaathi. Vehicle workshops usually handle periodic servicing, engine and brake repairs, electrical faults and parts replacement, for one brand or for many. Before you decide: ask for an estimate before work starts, whether parts are genuine, whether there is a warranty on the repair, and when the vehicle will be ready. This listing is built from public business information and has not been verified by LocalSaathi or confirmed by the owner, so please check timings, services and charges directly with PVS Bike Tech. If this is your business, you can claim the listing to add your own photos, services and prices. Services listed for PVS Bike Tech include battery replacement, disc brake pad change and scooter general service. Clutch and drive jobs are common at two-wheeler shops in Jeevan Bima Nagar, Bengaluru. This usually covers adjusting or replacing the clutch cable, fitting new clutch plates when the bike slips, and changing a worn chain and sprocket kit. On scooters, the drive belt and rollers are checked and replaced as needed. For brake complaints, tell PVS Bike Tech whether the bike has drum or disc brakes and whether the problem is in the front, rear or both. Mention any squeal, grinding or a lever that pulls all the way to the grip. Clear details help the mechanic check the right parts quickly.

Key Business Highlights

Deals today

1

Credentials & Certifications

LocalSaathi verification

Not verified yet

Awarded only after document verification

Services & Prices

  • Carburettor cleaning and tuning

    From β‚Ή700 / job

    Approx. price Β· confirm with the business

    The carburettor is removed, opened and cleaned of dirt and varnish, then refitted and tuned for a steady idle and smooth pickup. It helps with stalling, poor mileage and hard starting on older bikes. Worn gaskets or needles may be changed at extra cost.

  • Clutch plate replacement

    From β‚Ή1,900 / job

    Approx. price Β· confirm with the business

    When the engine revs but the bike does not pick up speed, the clutch plates are often worn. The clutch cover is opened, the friction plates and springs are replaced as needed, and fresh oil is filled. The job usually takes a few hours.

  • Clutch, brake or throttle cable change

    From β‚Ή270 / cable

    Approx. price Β· confirm with the business

    A stretched or frayed cable makes the clutch hard, the brake weak or the throttle sticky. The old cable is removed, a new one is routed along the same path and adjusted for the right slack. Cables cost little but matter a lot.

  • Engine top overhaul

    From β‚Ή11,600 / job

    Approx. price Β· confirm with the business

    When the bike smokes, loses power or burns oil, the cylinder head and piston area are opened. Work may include new piston rings, valve grinding, gaskets and a cylinder bore if needed. The price depends on the parts used, and the job usually takes a day or two.

  • Front fork oil seal replacement

    From β‚Ή1,300 / pair

    Approx. price Β· confirm with the business

    Oil leaking down the front fork tubes means the seals are worn, which makes braking and bumps feel harsh. The forks are opened, new seals are fitted, and fresh fork oil is filled. Both sides are usually done together to keep the ride even.

  • New tyre with fitting

    From β‚Ή1,400 / tyre

    Approx. price Β· confirm with the business

    A worn tyre is replaced with a new one of the size marked on the sidewall, and the wheel is balanced or checked for wobble. Tyres are usually due when the tread is near the wear marks or the rubber shows cracks. Prices depend on size and type.

More services

Battery replacement

Battery replacement

Time varies
Chain sprocket kit replacement

Chain sprocket kit replacement

Time varies
Clutch plate replacement

Clutch plate replacement

Time varies
General bike service

General bike service

Time varies
Puncture repair

Puncture repair

Time varies
Scooter general service

Scooter general service

Time varies

Hot Deals

1 live now

New codes every day Β· valid till 11:59 PM

Today's deal Offer of the day20 of 20 left today

5% off your bill

Valid all day today

Terms: 5% off the total bill. Code valid today only. Get a new code each day. One code per customer per deal per day. Cannot be combined with other offers unless the shop says so.

Share

Your code Β· PVS Bike Tech

Tap Get code to unlock

Free Single use Valid today

Codes are single-use and valid today only (till 11:59 PM, or earlier if the deal ends). Tomorrow, get a new code. If the shop refuses a code, report it under My Deals.

Gallery

Questions & Answers

Common questions

  • Where is PVS Bike Tech located?

    PVS Bike Tech is in Jeevan Bima Nagar, Bengaluru. The address on record is 1048, 10th Main Rd, LIC Colony, HAL 3rd Stage, Sector 11.

  • How can I contact PVS Bike Tech?

    Call or WhatsApp on the number shown on this page, or use Get Quote to send your requirement through LocalSaathi.

  • What should I ask a two-wheeler repair workshop before deciding?

    Ask for an estimate before work starts, whether parts are genuine, whether there is a warranty on the repair, and when the vehicle will be ready.

  • Is PVS Bike Tech verified by LocalSaathi?

    Not yet. The details come from public business information and the owner has not claimed this listing, so please confirm them directly with the business.

  • Will I get a GST bill from PVS Bike Tech?

    Many shops give a written or printed bill listing parts and labour, and some provide a GST bill on request. Whether PVS Bike Tech issues one is not confirmed here. Please ask PVS Bike Tech before the job starts if you need a GST bill.

  • Can PVS Bike Tech send a mechanic if my bike breaks down on the road?

    Some local mechanics come out for punctures, battery trouble or small faults nearby, while others ask you to bring the bike in. Whether PVS Bike Tech provides roadside or emergency help is not confirmed here, so please ask PVS Bike Tech before you need it.

  • Is a free check-up available before service at PVS Bike Tech?

    Some shops look at the bike and tell you the likely cost without charge, while others charge once work begins. This page does not confirm what PVS Bike Tech does, so please ask PVS Bike Tech whether a free check-up is possible.

  • What are the usual working hours of PVS Bike Tech?

    Most two-wheeler shops in Jeevan Bima Nagar, Bengaluru open in the morning and work till evening, and some close one day a week or for a few hours in the afternoon. Hours can change on holidays, so please call or WhatsApp PVS Bike Tech to confirm today's timings.

Customer questions

No customer questions yet. Ask the business below.

Customer Reviews

Contact & Location

Address

1048, 10th Main Rd, LIC Colony, HAL 3rd Stage, Sector 11, Jeevan Bima Nagar

Bengaluru, Karnataka 560075

Share this page

Know someone who needs PVS Bike Tech? Send them this page.

https://www.localsaathi.in/business/pvs-bike-tech-jeevan-bima-nagar-bengaluru
Scan to open this page
Newsletter Β· Weekly drop

Get Deals & Updates

Weekly deals, new service launches, and expert tips β€” straight to your inbox.

No spam, ever. Unsubscribe in one click.

PVS Bike Tech β€” Two Wheeler Mechanics in Jeevan Bima Nagar