Skip to main content
Navi Cooling Zone, AC Repair in Gupta Layout, Bengaluru
1 / 1
Home Services
Navi Cooling Zone

Navi Cooling Zone

Gupta Layout, Bengaluru
Not verified Claimed

Live now:Today's deal

5% offyour bill

About

Navi Cooling Zone is an ac repair business in Gupta Layout, Bengaluru, Karnataka. The address on record is 27, Car St, beside Indian overseas Bank Halasuru, Halasuru. LocalSaathi does not have a phone number for Navi Cooling Zone; use the map on this page for directions. Local businesses in this line of work can differ widely in what they offer, what they charge and how soon they can serve you. Before you decide: ask exactly what is included, the full price with any extra charges, the time it will take, and what happens if you are not satisfied. This listing is built from public business information and has not been verified by LocalSaathi or confirmed by the owner, so please check timings, services and charges directly with Navi Cooling Zone. If this is your business, you can claim the listing to add your own photos, services and prices. Services listed for Navi Cooling Zone include water leak repair, fan motor replacement and jet cleaning. AC services of this type in Gupta Layout, Bengaluru usually start with a general service, where filters are washed, the indoor coil and fins are sprayed or jet washed, the drain tray and pipe are cleared, and the outdoor unit is cleaned. Cooling and current draw are usually checked afterwards. If your AC trips the MCB, keeps tripping the stabiliser or smells burnt, switch it off at the wall and do not restart it until Navi Cooling Zone or another technician has checked it. Note the error code shown on the display, if any, since it helps find the fault faster.

Key Business Highlights

Deals today

1

Credentials & Certifications

LocalSaathi verification

Not verified yet

Awarded only after document verification

Services & Prices

  • Gas leak repair and brazing

    From โ‚น1,900 / job

    Approx. price ยท confirm with the business

    Leaks usually occur at flare nuts, pipe joints or small cracks in the coil. The technician traces the leak with soap solution or a detector, then tightens the joint, redoes the flare or brazes the spot. Gas refilling after the repair is usually billed separately.

  • Outdoor unit wall stand fitting

    From โ‚น1,200 / stand

    Approx. price ยท confirm with the business

    An outdoor unit stand or bracket is fixed to the wall or balcony ledge with anchors, and the unit is placed on rubber pads to cut vibration. Stands vary in size and material, and the price usually covers the stand and fitting. High walls may need ropes or extra hands.

  • PCB repair

    From โ‚น3,500 / job

    Approx. price ยท confirm with the business

    The PCB, or control board, runs the AC's functions. Faults show up as a dead unit, blinking lights, error codes or a remote that does not respond. Technicians usually test the board and repair burnt components, or replace it if needed. Inverter AC boards often cost more.

  • Split AC general service

    From โ‚น650 / AC

    Approx. price ยท confirm with the business

    A routine service for a wall mounted split AC. Filters are washed, the indoor coil and fins are sprayed, the drain tray and pipe are cleared, and the outdoor unit is cleaned. The AC is then run to check cooling, airflow and current draw.

  • Split AC uninstallation

    From โ‚น900 / AC

    Approx. price ยท confirm with the business

    Before removal, the technician pumps the gas down into the outdoor unit so it is not lost. Both units are then removed, the pipes are capped and the wall bracket is taken down if needed. This is often booked when moving house or replacing an old AC.

  • Window AC uninstallation

    From โ‚น450 / AC

    Approx. price ยท confirm with the business

    The window AC is unplugged, slid out of its frame and carried down with care, as these units are heavy. The opening is usually covered with a board or left as it is. The charge rises for upper floors, high windows or units stuck in old fittings.

More services

AC installation

AC installation

Time varies
Compressor replacement

Compressor replacement

Time varies
Gas refilling

Gas refilling

Time varies
Jet cleaning

Jet cleaning

Time varies
Water leak repair

Water leak repair

Time varies
Window AC service

Window AC service

Time varies

Hot Deals

1 live now

New codes every day ยท valid till 11:59 PM

Today's deal Offer of the day20 of 20 left today

5% off your bill

Valid all day today

Terms: 5% off the total bill. Code valid today only. Get a new code each day. One code per customer per deal per day. Cannot be combined with other offers unless the shop says so.

Share

Your code ยท Navi Cooling Zone

Tap Get code to unlock

Free Single use Valid today

Codes are single-use and valid today only (till 11:59 PM, or earlier if the deal ends). Tomorrow, get a new code. If the shop refuses a code, report it under My Deals.

Gallery

Questions & Answers

Common questions

  • Where is Navi Cooling Zone located?

    Navi Cooling Zone is in Gupta Layout, Bengaluru. The address on record is 27, Car St, beside Indian overseas Bank Halasuru, Halasuru.

  • How can I contact Navi Cooling Zone?

    LocalSaathi has no phone number for Navi Cooling Zone yet. Use Directions to visit. If you are the owner, claim this listing to add your number.

  • What should I ask an ac repair business before deciding?

    Ask exactly what is included, the full price with any extra charges, the time it will take, and what happens if you are not satisfied.

  • Is Navi Cooling Zone verified by LocalSaathi?

    Not yet. The details come from public business information and the owner has not claimed this listing, so please confirm them directly with the business.

  • Does Navi Cooling Zone work on cassette or ductable ACs?

    Some AC services handle cassette, tower and ductable units used in offices and shops, while others work only on split and window ACs. Please ask Navi Cooling Zone whether they service these units and how they price the work.

  • What is the difference between general service and jet cleaning?

    A general service usually covers filter washing, coil spraying, drain clearing and basic checks. Jet or foam cleaning goes deeper, using a pressure pump or foam to clean the coil and blower, and usually costs more. Please ask Navi Cooling Zone which one your AC needs.

  • Do I need a stabiliser for my AC?

    Many newer inverter ACs work over a wide voltage range and may not need a separate stabiliser, while older or non-inverter units often do. It depends on the model and local voltage. Please check the AC manual and ask Navi Cooling Zone for advice.

  • How much does a PCB repair cost?

    PCB repair or replacement in Bengaluru usually costs around Rs 1,500 to 5,000 for a split AC, and more for some inverter models. Repair is often possible, while replacement depends on part availability. Please ask Navi Cooling Zone to check the board and quote before going ahead.

Customer questions

No customer questions yet. Ask the business below.

Customer Reviews

Contact & Location

Address

27, Car St, beside Indian overseas Bank Halasuru, Halasuru, Gupta Layout

Bengaluru, Karnataka 560008

Contact

No phone number listed. Use Get Quote to reach this business.

Share this page

Know someone who needs Navi Cooling Zone? Send them this page.

https://www.localsaathi.in/business/navi-cooling-zone-gupta-layout-bengaluru
Scan to open this page
Newsletter ยท Weekly drop

Get Deals & Updates

Weekly deals, new service launches, and expert tips โ€” straight to your inbox.

No spam, ever. Unsubscribe in one click.

Navi Cooling Zone โ€” AC Repair in Gupta Layout | LocalSaathi