Skip to main content
Nagu Bullet Works, Two Wheeler Mechanics in Attibele, Bengaluru
1 / 1
Automobiles

Nagu Bullet Works

Attibele, Bengaluru
Not verified Claimed

Live now:Today's deal

5% offyour bill

About

Nagu Bullet Works is a two-wheeler repair workshop in Sarjapura, Attibele, Karnataka. The address on record is sts back side, main road, Thilak nagar. You can call or WhatsApp on the number shown on this page, or send an enquiry through LocalSaathi. Vehicle workshops usually handle periodic servicing, engine and brake repairs, electrical faults and parts replacement, for one brand or for many. Before you decide: ask for an estimate before work starts, whether parts are genuine, whether there is a warranty on the repair, and when the vehicle will be ready. This listing is built from public business information and has not been verified by LocalSaathi or confirmed by the owner, so please check timings, services and charges directly with Nagu Bullet Works. If this is your business, you can claim the listing to add your own photos, services and prices. Services listed for Nagu Bullet Works include scooter general service, general bike service and carburettor cleaning. Clutch and drive jobs are common at two-wheeler shops in Attibele, Bengaluru. This usually covers adjusting or replacing the clutch cable, fitting new clutch plates when the bike slips, and changing a worn chain and sprocket kit. On scooters, the drive belt and rollers are checked and replaced as needed. For brake complaints, tell Nagu Bullet Works whether the bike has drum or disc brakes and whether the problem is in the front, rear or both. Mention any squeal, grinding or a lever that pulls all the way to the grip. Clear details help the mechanic check the right parts quickly.

Key Business Highlights

Deals today

1

Credentials & Certifications

LocalSaathi verification

Not verified yet

Awarded only after document verification

Services & Prices

  • Air filter cleaning or replacement

    From ₹400 / job

    Approx. price · confirm with the business

    A clogged air filter chokes the engine, which can lower mileage and pickup. Foam filters are washed and oiled, while paper filters are blown clean or replaced. Riders in dusty parts of the city may need this done more often than the manual says.

  • Chain cleaning, lubrication and adjustment

    From ₹200 / job

    Approx. price · confirm with the business

    The chain is cleaned of mud and old grease, lubricated with chain spray, and adjusted to the right slack. Doing this every 500 to 1,000 km, and after rain, helps the chain and sprockets last longer and keeps the ride smooth and quiet.

  • Clutch plate replacement

    From ₹2,000 / job

    Approx. price · confirm with the business

    When the engine revs but the bike does not pick up speed, the clutch plates are often worn. The clutch cover is opened, the friction plates and springs are replaced as needed, and fresh oil is filled. The job usually takes a few hours.

  • Clutch, brake or throttle cable change

    From ₹300 / cable

    Approx. price · confirm with the business

    A stretched or frayed cable makes the clutch hard, the brake weak or the throttle sticky. The old cable is removed, a new one is routed along the same path and adjusted for the right slack. Cables cost little but matter a lot.

  • Front fork oil seal replacement

    From ₹1,300 / pair

    Approx. price · confirm with the business

    Oil leaking down the front fork tubes means the seals are worn, which makes braking and bumps feel harsh. The forks are opened, new seals are fitted, and fresh fork oil is filled. Both sides are usually done together to keep the ride even.

  • Fuel injector and throttle body cleaning

    From ₹1,400 / job

    Approx. price · confirm with the business

    Bikes and scooters with fuel injection can idle rough or hesitate when the injector or throttle body gets dirty. These parts are cleaned and the system is reset with a scan tool where needed. Not every shop has the tools for this.

More services

Carburettor cleaning

Carburettor cleaning

Time varies
Disc brake pad change

Disc brake pad change

Time varies
Engine overhaul

Engine overhaul

Time varies
General bike service

General bike service

Time varies
Puncture repair

Puncture repair

Time varies
Wiring and light repair

Wiring and light repair

Time varies

Hot Deals

1 live now

New codes every day · valid till 11:59 PM

Today's deal Offer of the day20 of 20 left today

5% off your bill

Valid all day today

Terms: 5% off the total bill. Code valid today only. Get a new code each day. One code per customer per deal per day. Cannot be combined with other offers unless the shop says so.

Share

Your code · Nagu Bullet Works

Tap Get code to unlock

Free Single use Valid today

Codes are single-use and valid today only (till 11:59 PM, or earlier if the deal ends). Tomorrow, get a new code. If the shop refuses a code, report it under My Deals.

Gallery

Questions & Answers

Common questions

  • Where is Nagu Bullet Works located?

    Nagu Bullet Works is in Sarjapura, Attibele. The address on record is sts back side, main road, Thilak nagar.

  • How can I contact Nagu Bullet Works?

    Call or WhatsApp on the number shown on this page, or use Get Quote to send your requirement through LocalSaathi.

  • What should I ask a two-wheeler repair workshop before deciding?

    Ask for an estimate before work starts, whether parts are genuine, whether there is a warranty on the repair, and when the vehicle will be ready.

  • Is Nagu Bullet Works verified by LocalSaathi?

    Not yet. The details come from public business information and the owner has not claimed this listing, so please confirm them directly with the business.

  • Does Nagu Bullet Works do the pollution check for my bike?

    Pollution under control (PUC) tests are usually done at separate testing centres, often found at petrol pumps, and some service shops have one nearby. Whether Nagu Bullet Works does PUC tests is not confirmed here, so please ask Nagu Bullet Works.

  • Can I see the old parts that were removed?

    It is common to ask for the old parts back or at least to see them, so you know what was changed. Please ask Nagu Bullet Works before the work starts if you would like the old parts kept aside for you to check.

  • How much does a puncture repair usually cost?

    In Bengaluru, a tubeless puncture repair at a local shop usually costs around Rs 80 to 200, and a tube puncture patch around Rs 100 to 300, depending on the wheel and the time of day. Please confirm the rate with Nagu Bullet Works.

  • Why do my bike brakes squeak or feel weak?

    Squeaking often comes from worn brake shoes or pads, dust or a glazed disc, while weak brakes may mean worn parts, a stretched cable or air in the brake fluid. A mechanic usually checks both wheels. Please ask Nagu Bullet Works to inspect them soon.

Customer questions

No customer questions yet. Ask the business below.

Customer Reviews

Contact & Location

Address

sts back side, main road, Thilak nagar, Attibele

Bengaluru, Karnataka 562107

Share this page

Know someone who needs Nagu Bullet Works? Send them this page.

https://www.localsaathi.in/business/nagu-bullet-works-sarjapura-attibele
Scan to open this page
Newsletter · Weekly drop

Get Deals & Updates

Weekly deals, new service launches, and expert tips — straight to your inbox.

No spam, ever. Unsubscribe in one click.

Nagu Bullet Works — Two Wheeler Mechanics in Sarjapura