Skip to main content
MNS Bike Service, Two Wheeler Mechanics in Anekal, Bengaluru
1 / 1
Automobiles

MNS Bike Service

Anekal, Bengaluru
Not verified Claimed

Live now:Today's deal

5% offyour bill

About

MNS Bike Service is a two-wheeler repair workshop in Anekal, Bengaluru, Karnataka. The address on record is Mallikarjuna building, taluk, behind St Marys school, Hebbagodi. You can call or WhatsApp on the number shown on this page, or send an enquiry through LocalSaathi. Vehicle workshops usually handle periodic servicing, engine and brake repairs, electrical faults and parts replacement, for one brand or for many. Before you decide: ask for an estimate before work starts, whether parts are genuine, whether there is a warranty on the repair, and when the vehicle will be ready. This listing is built from public business information and has not been verified by LocalSaathi or confirmed by the owner, so please check timings, services and charges directly with MNS Bike Service. If this is your business, you can claim the listing to add your own photos, services and prices. Services listed for MNS Bike Service include engine oil change, puncture repair and carburettor cleaning. Suspension jobs usually include replacing front fork oil seals when oil leaks onto the fork, changing fork oil, and fitting new rear shock absorbers when the ride feels bouncy. Steering bearings are also checked, as a worn bearing can make the handlebar feel stiff or loose. Shops in Anekal, Bengaluru are often small, so call MNS Bike Service before you go to ask where to park and how long the wait is likely to be. Weekday mornings are usually calmer than weekends. Keep your phone handy, as the mechanic may call if a part needs changing.

Key Business Highlights

Deals today

1

Credentials & Certifications

LocalSaathi verification

Not verified yet

Awarded only after document verification

Services & Prices

  • Carburettor cleaning and tuning

    From ₹650 / job

    Approx. price · confirm with the business

    The carburettor is removed, opened and cleaned of dirt and varnish, then refitted and tuned for a steady idle and smooth pickup. It helps with stalling, poor mileage and hard starting on older bikes. Worn gaskets or needles may be changed at extra cost.

  • Clutch, brake or throttle cable change

    From ₹500 / cable

    Approx. price · confirm with the business

    A stretched or frayed cable makes the clutch hard, the brake weak or the throttle sticky. The old cable is removed, a new one is routed along the same path and adjusted for the right slack. Cables cost little but matter a lot.

  • Engine top overhaul

    From ₹6,300 / job

    Approx. price · confirm with the business

    When the bike smokes, loses power or burns oil, the cylinder head and piston area are opened. Work may include new piston rings, valve grinding, gaskets and a cylinder bore if needed. The price depends on the parts used, and the job usually takes a day or two.

  • New tyre with fitting

    From ₹2,000 / tyre

    Approx. price · confirm with the business

    A worn tyre is replaced with a new one of the size marked on the sidewall, and the wheel is balanced or checked for wobble. Tyres are usually due when the tread is near the wear marks or the rubber shows cracks. Prices depend on size and type.

  • Tubeless tyre puncture repair

    From ₹250 / tyre

    Approx. price · confirm with the business

    The puncture is found, the object is removed and the hole is sealed with a rubber plug, usually without taking the wheel off. The tyre is then inflated to the right pressure. Large cuts or holes in the sidewall usually cannot be repaired this way.

  • Wash and polish

    From ₹350 / wash

    Approx. price · confirm with the business

    The bike or scooter is washed with water and shampoo, wiped dry, and the painted parts are polished. The chain is usually lubricated after the wash so it does not rust. Some shops use a pressure washer, so ask them to avoid spraying the electrical parts.

More services

Battery replacement

Battery replacement

Time varies
Carburettor cleaning

Carburettor cleaning

Time varies
Chain sprocket kit replacement

Chain sprocket kit replacement

Time varies
Fork oil seal replacement

Fork oil seal replacement

Time varies
Puncture repair

Puncture repair

Time varies
Scooter general service

Scooter general service

Time varies

Hot Deals

1 live now

New codes every day · valid till 11:59 PM

Today's deal Offer of the day20 of 20 left today

5% off your bill

Valid all day today

Terms: 5% off the total bill. Code valid today only. Get a new code each day. One code per customer per deal per day. Cannot be combined with other offers unless the shop says so.

Share

Your code · MNS Bike Service

Tap Get code to unlock

Free Single use Valid today

Codes are single-use and valid today only (till 11:59 PM, or earlier if the deal ends). Tomorrow, get a new code. If the shop refuses a code, report it under My Deals.

Gallery

Questions & Answers

Common questions

  • Where is MNS Bike Service located?

    MNS Bike Service is in Anekal, Bengaluru. The address on record is Mallikarjuna building, taluk, behind St Marys school, Hebbagodi.

  • How can I contact MNS Bike Service?

    Call or WhatsApp on the number shown on this page, or use Get Quote to send your requirement through LocalSaathi.

  • What should I ask a two-wheeler repair workshop before deciding?

    Ask for an estimate before work starts, whether parts are genuine, whether there is a warranty on the repair, and when the vehicle will be ready.

  • Is MNS Bike Service verified by LocalSaathi?

    Not yet. The details come from public business information and the owner has not claimed this listing, so please confirm them directly with the business.

  • Will I get a GST bill from MNS Bike Service?

    Many shops give a written or printed bill listing parts and labour, and some provide a GST bill on request. Whether MNS Bike Service issues one is not confirmed here. Please ask MNS Bike Service before the job starts if you need a GST bill.

  • Can I see the old parts that were removed?

    It is common to ask for the old parts back or at least to see them, so you know what was changed. Please ask MNS Bike Service before the work starts if you would like the old parts kept aside for you to check.

  • Should I ask for an estimate before the work begins?

    Yes, it helps to ask for a rough estimate with parts and labour mentioned, and to ask the mechanic to call before fitting anything extra. This makes it easier to compare the final bill. Please ask MNS Bike Service how they share estimates.

  • Can I bring my own engine oil or spare parts to MNS Bike Service?

    Some shops fit oil or parts brought by the rider and charge only labour, while others prefer to use their own stock so they can stand behind the work. Please ask MNS Bike Service whether they fit customer parts and how labour is charged.

Customer questions

No customer questions yet. Ask the business below.

Customer Reviews

Contact & Location

Address

Mallikarjuna building, taluk, behind St Marys school, Hebbagodi, Anekal

Bengaluru, Karnataka 560099

Share this page

Know someone who needs MNS Bike Service? Send them this page.

https://www.localsaathi.in/business/mns-bike-service-anekal-bengaluru
Scan to open this page
Newsletter · Weekly drop

Get Deals & Updates

Weekly deals, new service launches, and expert tips — straight to your inbox.

No spam, ever. Unsubscribe in one click.

MNS Bike Service — Two Wheeler Mechanics in Anekal