Skip to main content
Meenakshi Hardware, Plumbing in BTM Layout, Bengaluru
1 / 1
Home Services
Meenakshi Hardware

Meenakshi Hardware

BTM Layout, Bengaluru
Not verified Claimed

Live now:Today's deal

5% offyour bill

About

Meenakshi Hardware is a plumbing service in BTM Layout, Bengaluru, Karnataka. The address on record is 320/7, 100 Feet Ring Rd, near silk board, Dollar Layout, 3rd Phase. LocalSaathi does not have a phone number for Meenakshi Hardware; use the map on this page for directions. Plumbers usually handle leaks, blocked drains, taps, tanks, motors and bathroom fittings, as well as new pipe work during renovation. Before you decide: ask for the visit charge, a price before work begins, whether materials are included, and how soon someone can reach you if it is urgent. This listing is built from public business information and has not been verified by LocalSaathi or confirmed by the owner, so please check timings, services and charges directly with Meenakshi Hardware. If this is your business, you can claim the listing to add your own photos, services and prices. Water tank and pump work at a service like Meenakshi Hardware usually covers float valves, overflow pipes, tank inlet and outlet lines, and connections to the sump motor or pressure pump. The list for Meenakshi Hardware includes plumbing, Western toilet installation and blocked drain clearing. In independent houses, plumbers also handle outdoor taps, garden lines and the pipes running up to the terrace. Ask Meenakshi Hardware about the visit charge before the plumber comes, and whether it is adjusted against the bill if work goes ahead. Once the problem is found, ask for labour and material costs separately so you can compare fittings or buy them yourself if you prefer.

Key Business Highlights

Deals today

1

Credentials & Certifications

LocalSaathi verification

Not verified yet

Awarded only after document verification

Services & Prices

  • Angle Valve Replacement

    From โ‚น400 / valve

    Approx. price ยท confirm with the business

    Angle valves control water to a basin, toilet or geyser. A stiff or leaking valve is usually swapped for a new one along with the flexible connector. It is a quick job, and the price depends on the valve type and how easy it is to reach.

  • Bathroom Drain Block Clearing

    From โ‚น400 / drain

    Approx. price ยท confirm with the business

    Bathroom floor drains and basin waste lines often block with hair and soap. The plumber removes the grating, clears the trap, and uses rods or a pump for deeper blocks. Drains that block again may need the trap or slope checked.

  • Dripping Tap Repair

    From โ‚น500 / tap

    Approx. price ยท confirm with the business

    A dripping tap usually needs a new washer, spindle or cartridge. The plumber shuts the water, opens the tap, fits the part and checks for drips. Old or badly scaled taps may need full replacement, which costs more with the new tap.

  • Geyser Plumbing Connection

    From โ‚น950 / geyser

    Approx. price ยท confirm with the business

    Geyser plumbing covers connecting the cold water inlet, the hot water outlet to the mixer or shower, and the pressure release valve. The plumber checks all joints for leaks. Wiring and wall mounting may be done by another worker or charged separately.

  • Pressure Pump Installation

    From โ‚น2,100 / pump

    Approx. price ยท confirm with the business

    A pressure pump boosts water flow to showers and taps on upper floors or in flats with weak supply. The plumber fixes the pump near the tank line, fits bypass valves and tests the flow. The pump itself is usually bought separately.

  • Toilet Block Clearing

    From โ‚น750 / toilet

    Approx. price ยท confirm with the business

    A blocked toilet is usually cleared with a plunger, a drain rod or a pressure pump. If the block is in the outlet or main line, the plumber may need to open a chamber outside. The cost depends on where the block is and how long it takes.

More services

Bathroom pipeline replacement

Bathroom pipeline replacement

Time varies
Blocked drain clearing

Blocked drain clearing

Time varies
Float valve replacement

Float valve replacement

Time varies
Tap repair

Tap repair

Time varies
Water motor connection

Water motor connection

Time varies

Hot Deals

1 live now

New codes every day ยท valid till 11:59 PM

Today's deal Offer of the day20 of 20 left today

5% off your bill

Valid all day today

Terms: 5% off the total bill. Code valid today only. Get a new code each day. One code per customer per deal per day. Cannot be combined with other offers unless the shop says so.

Share

Your code ยท Meenakshi Hardware

Tap Get code to unlock

Free Single use Valid today

Codes are single-use and valid today only (till 11:59 PM, or earlier if the deal ends). Tomorrow, get a new code. If the shop refuses a code, report it under My Deals.

Gallery

Questions & Answers

Common questions

  • Where is Meenakshi Hardware located?

    Meenakshi Hardware is in BTM Layout, Bengaluru. The address on record is 320/7, 100 Feet Ring Rd, near silk board, Dollar Layout, 3rd Phase.

  • How can I contact Meenakshi Hardware?

    LocalSaathi has no phone number for Meenakshi Hardware yet. Use Directions to visit. If you are the owner, claim this listing to add your number.

  • What should I ask a plumbing service before deciding?

    Ask for the visit charge, a price before work begins, whether materials are included, and how soon someone can reach you if it is urgent.

  • Is Meenakshi Hardware verified by LocalSaathi?

    Not yet. The details come from public business information and the owner has not claimed this listing, so please confirm them directly with the business.

  • What payment modes does Meenakshi Hardware accept?

    Most local plumbers in Bengaluru take cash and UPI, and some accept cards or bank transfers for bigger jobs. Please confirm payment modes with Meenakshi Hardware before the work starts and ask whether a GST bill is possible if you need one.

  • Why is the water pressure low in my taps?

    Low pressure can come from a clogged aerator or filter, scale in the pipes, an air lock, a partly closed valve or a weak pump. A plumber usually checks these step by step. Please call Meenakshi Hardware to describe which taps are affected.

  • Should I buy the fittings or will the plumber bring them?

    It works both ways. Some plumbers bring common fittings and add them to the bill, while others ask you to buy taps, sinks and toilets yourself. Please ask Meenakshi Hardware how they prefer to work and get a parts list before buying anything.

  • Do plumbers charge per point or per hour?

    Plumbers in Bengaluru often price small repairs per job, new fittings per point and larger work as a full package. Hourly rates are less common. Please ask Meenakshi Hardware how they price your type of work before the job starts.

Customer questions

No customer questions yet. Ask the business below.

Customer Reviews

Contact & Location

Address

320/7, 100 Feet Ring Rd, near silk board, Dollar Layout, 3rd Phase, BTM Layout

Bengaluru, Karnataka 560078

Contact

No phone number listed. Use Get Quote to reach this business.

Share this page

Know someone who needs Meenakshi Hardware? Send them this page.

https://www.localsaathi.in/business/meenakshi-hardware-btm-layout-bengaluru
Scan to open this page
Newsletter ยท Weekly drop

Get Deals & Updates

Weekly deals, new service launches, and expert tips โ€” straight to your inbox.

No spam, ever. Unsubscribe in one click.

Meenakshi Hardware โ€” Plumbing in BTM Layout | LocalSaathi