Skip to main content
Mayur Electricals And Hardware, Electrician in Chikka Madivala, Bengaluru
1 / 1
Home Services
Mayur Electricals And Hardware

Mayur Electricals And Hardware

Chikka Madivala, Bengaluru
Not verified Claimed

Live now:Today's deal

5% offyour bill

About

Mayur Electricals And Hardware is an electrician in Bengaluru, Karnataka. The address on record is VP Rd, Old Madiwala, Chikka Madivala, 1st Stage. You can call or WhatsApp on the number shown on this page, or send an enquiry through LocalSaathi. Electricians usually handle wiring, switches, fans, lights, fault-finding and small installations for homes, shops and offices. Before you decide: ask for the visit charge, a price before work begins, whether materials are included, and whether the work comes with any guarantee. This listing is built from public business information and has not been verified by LocalSaathi or confirmed by the owner, so please check timings, services and charges directly with Mayur Electricals And Hardware. If this is your business, you can claim the listing to add your own photos, services and prices. Services listed for Mayur Electricals And Hardware include electrician, light fitting and inverter installation. Electricians of this type in Bengaluru usually fit and repair ceiling fans, wall fans and exhaust fans, including changing capacitors, regulators and bearings. They also install tube lights, LED panels, batten lights, decorative fittings and chandeliers, and replace bulb holders and switches that have worn out or burnt. For recurring issues, like a socket that keeps loosening or an MCB that trips every evening, tell Mayur Electricals And Hardware about the pattern rather than only the latest problem. Note which appliances were running at the time. Repeated trips often point to an overloaded circuit or a faulty appliance rather than the switch itself.

View Company Profile

Key Business Highlights

Deals today

1

Credentials & Certifications

LocalSaathi verification

Not verified yet

Awarded only after document verification

Services & Prices

  • Ceiling fan installation

    From ₹280 / fan

    Approx. price · confirm with the business

    A new ceiling fan is assembled, hung on the existing hook, wired to the regulator and tested at all speeds. Extra work, such as a new hook, a down rod for a high ceiling or moving the point, usually costs more. Removing an old fan may be charged separately.

  • Distribution board installation

    From ₹1,100 / board

    Approx. price · confirm with the business

    An old fuse box or worn board is replaced with a new distribution board fitted with MCBs and, where suited, an RCCB for shock protection. Circuits are usually labelled room by room. Cost depends on the number of ways, the parts used and any wiring changes.

  • Electrician visit and inspection

    From ₹400 / visit

    Approx. price · confirm with the business

    A basic visit where the electrician checks the problem, such as a dead socket, tripping MCB or flickering light, and explains the fault and the cost of fixing it. Many electricians adjust this charge against the repair if you go ahead. Parts are priced separately.

  • Home automation setup, one room

    From ₹9,400 / room

    Approx. price · confirm with the business

    Lights, fans and sockets in one room are fitted with smart modules or a smart panel and set up on a phone app, with scenes and schedules such as night mode. Cost varies with the number of switches, the modules chosen and whether a hub is needed.

  • MCB replacement

    From ₹450 / MCB

    Approx. price · confirm with the business

    A faulty or often tripping MCB in the distribution board is replaced with a new one of the right rating. The electrician usually checks whether the trip came from an overloaded circuit or a fault elsewhere. The MCB part cost is usually added to the labour charge.

  • Switch or socket replacement

    From ₹110 / point

    Approx. price · confirm with the business

    Loose, burnt or sparking switches and sockets are replaced on the same board, and connections are tightened and tested. The rate usually covers labour per point, with the switch or socket added to the bill. A full board plate change may be priced separately.

More services

Fan repair

Fan repair

Time varies
Fault finding

Fault finding

Time varies
Geyser installation

Geyser installation

Time varies
Home automation setup

Home automation setup

Time varies
Switch and socket repair

Switch and socket repair

Time varies

Hot Deals

1 live now

New codes every day · valid till 11:59 PM

Today's deal Offer of the day20 of 20 left today

5% off your bill

Valid all day today

Terms: 5% off the total bill. Code valid today only. Get a new code each day. One code per customer per deal per day. Cannot be combined with other offers unless the shop says so.

Share

Your code · Mayur Electricals And Hardware

Tap Get code to unlock

Free Single use Valid today

Codes are single-use and valid today only (till 11:59 PM, or earlier if the deal ends). Tomorrow, get a new code. If the shop refuses a code, report it under My Deals.

Gallery

Questions & Answers

Common questions

  • Where is Mayur Electricals And Hardware located?

    Mayur Electricals And Hardware is in Bengaluru. The address on record is VP Rd, Old Madiwala, Chikka Madivala, 1st Stage.

  • How can I contact Mayur Electricals And Hardware?

    Call or WhatsApp on the number shown on this page, or use Get Quote to send your requirement through LocalSaathi.

  • What should I ask an electrician before deciding?

    Ask for the visit charge, a price before work begins, whether materials are included, and whether the work comes with any guarantee.

  • Is Mayur Electricals And Hardware verified by LocalSaathi?

    Not yet. The details come from public business information and the owner has not claimed this listing, so please confirm them directly with the business.

  • Does Mayur Electricals And Hardware have an annual maintenance plan?

    Some electricians and firms have yearly maintenance plans for apartments, offices or larger homes, covering periodic checks of boards, earthing and fittings. Whether Mayur Electricals And Hardware has an AMC is not confirmed here, so please ask them what it would cover and cost.

  • Who buys the parts, me or the electrician?

    Both are common. Electricians often bring standard parts like switches, holders and MCBs and add them to the bill, while some customers buy parts themselves to choose the make. Please ask Mayur Electricals And Hardware which they prefer, and ask for the part price separately on the bill.

  • Is Mayur Electricals And Hardware insured for damage during work?

    Some larger electrical firms are insured for damage during work, while most local electricians are not. This is not confirmed for Mayur Electricals And Hardware, so please ask them directly, especially for big jobs like rewiring or chandelier fitting in high ceilings.

  • Can Mayur Electricals And Hardware rewire an old house?

    Rewiring an older house is usually done room by room or floor by floor and priced per point or as a whole job after inspection. It may involve breaking plaster for concealed wiring. Please ask Mayur Electricals And Hardware whether they take on rewiring and for a written estimate.

Customer questions

No customer questions yet. Ask the business below.

Customer Reviews

Contact & Location

Address

VP Rd, Old Madiwala, Chikka Madivala, 1st Stage, Chikka Madivala

Bengaluru, Karnataka 560068

Share this page

Know someone who needs Mayur Electricals And Hardware? Send them this page.

https://www.localsaathi.in/business/mayur-electricals-and-hardware-bengaluru
Scan to open this page
Newsletter · Weekly drop

Get Deals & Updates

Weekly deals, new service launches, and expert tips — straight to your inbox.

No spam, ever. Unsubscribe in one click.

Mayur Electricals And Hardware — Electrician in Bengaluru