Skip to main content
Mamatha Electricals, Electrician in Kumaraswamy Layout, Bengaluru
1 / 1
Home Services
Not verified Claimed

Live now:Today's deal

5% offyour bill

About

Mamatha Electricals is an electrician in Kumaraswamy Layout, Bengaluru, Karnataka. The address on record is KS 40, 14th Main Rd, 1st Stage. You can call or WhatsApp on the number shown on this page, or send an enquiry through LocalSaathi. Electricians usually handle wiring, switches, fans, lights, fault-finding and small installations for homes, shops and offices. Before you decide: ask for the visit charge, a price before work begins, whether materials are included, and whether the work comes with any guarantee. This listing is built from public business information and has not been verified by LocalSaathi or confirmed by the owner, so please check timings, services and charges directly with Mamatha Electricals. If this is your business, you can claim the listing to add your own photos, services and prices. Services listed for Mamatha Electricals include electrician, fault finding and new wiring points. Fault finding is a large part of an electrician's work in Bengaluru. When the power trips, a room goes dark or a socket stops working, the electrician usually checks the board, tests each circuit, and traces the problem to a loose joint, damaged wire, faulty appliance or overloaded line. Once the job is done, test every point before the electrician from Mamatha Electricals leaves. Switch fans to all speeds, turn lights on and off, plug a phone charger into new sockets, and reset the MCB once to check it holds. Ask for a written bill listing the work done and parts used.

View Company Profile

Key Business Highlights

Deals today

1

Credentials & Certifications

LocalSaathi verification

Not verified yet

Awarded only after document verification

Services & Prices

  • Geyser installation

    From ₹750 / geyser

    Approx. price · confirm with the business

    A storage or instant geyser is fixed on the bathroom or kitchen wall, connected to a suitable power point and checked for earthing. The water inlet and outlet may be connected by a plumber. Extra pipes, a new socket or a longer wire run are usually charged separately.

  • Home automation setup, one room

    From ₹12,100 / room

    Approx. price · confirm with the business

    Lights, fans and sockets in one room are fitted with smart modules or a smart panel and set up on a phone app, with scenes and schedules such as night mode. Cost varies with the number of switches, the modules chosen and whether a hub is needed.

  • Inverter and battery installation

    From ₹450 / set

    Approx. price · confirm with the business

    A home inverter is fixed in place, connected to its battery and wired so that chosen lights, fans and sockets run on backup during power cuts. The charge rises if separate backup wiring is needed across the house. Battery water and terminal checks are usually explained.

  • MCB replacement

    From ₹300 / MCB

    Approx. price · confirm with the business

    A faulty or often tripping MCB in the distribution board is replaced with a new one of the right rating. The electrician usually checks whether the trip came from an overloaded circuit or a fault elsewhere. The MCB part cost is usually added to the labour charge.

  • Switch or socket replacement

    From ₹240 / point

    Approx. price · confirm with the business

    Loose, burnt or sparking switches and sockets are replaced on the same board, and connections are tightened and tested. The rate usually covers labour per point, with the switch or socket added to the bill. A full board plate change may be priced separately.

  • Video doorbell installation

    From ₹900 / doorbell

    Approx. price · confirm with the business

    A video doorbell is fixed at the main door, connected to power or an existing bell wire, and linked to the home Wi-Fi and phone app. The electrician usually checks the signal near the door and the chime position inside. Running a new wire adds to the cost.

More services

Fan repair

Fan repair

Time varies
Inverter installation

Inverter installation

Time varies
MCB and DB work

MCB and DB work

Time varies
New wiring points

New wiring points

Time varies
Smart switch installation

Smart switch installation

Time varies

Hot Deals

1 live now

New codes every day · valid till 11:59 PM

Today's deal Offer of the day20 of 20 left today

5% off your bill

Valid all day today

Terms: 5% off the total bill. Code valid today only. Get a new code each day. One code per customer per deal per day. Cannot be combined with other offers unless the shop says so.

Share

Your code · Mamatha Electricals

Tap Get code to unlock

Free Single use Valid today

Codes are single-use and valid today only (till 11:59 PM, or earlier if the deal ends). Tomorrow, get a new code. If the shop refuses a code, report it under My Deals.

Gallery

Questions & Answers

Common questions

  • Where is Mamatha Electricals located?

    Mamatha Electricals is in Kumaraswamy Layout, Bengaluru. The address on record is KS 40, 14th Main Rd, 1st Stage.

  • How can I contact Mamatha Electricals?

    Call or WhatsApp on the number shown on this page, or use Get Quote to send your requirement through LocalSaathi.

  • What should I ask an electrician before deciding?

    Ask for the visit charge, a price before work begins, whether materials are included, and whether the work comes with any guarantee.

  • Is Mamatha Electricals verified by LocalSaathi?

    Not yet. The details come from public business information and the owner has not claimed this listing, so please confirm them directly with the business.

  • Can Mamatha Electricals fix a fan that runs slowly or makes noise?

    A slow fan often needs a new capacitor, and a noisy fan may need new bearings or tightening of the blades and canopy. In Bengaluru, such repairs usually cost Rs 150 to 450 plus parts. Please confirm the charge with Mamatha Electricals.

  • How much does home automation for one room usually cost?

    In Bengaluru, automating lights and fans in one room with smart switches often costs around Rs 3,000 to 15,000, depending on the number of switches, the type of modules and whether a hub is needed. Please ask Mamatha Electricals for an estimate based on your rooms.

  • Does Mamatha Electricals work for shops and offices too?

    Many home electricians also take small jobs at shops, clinics and offices, such as adding lights, sockets and board work. Larger commercial jobs may need a contractor. Please ask Mamatha Electricals whether they take on commercial work and their charges.

  • What does an RCCB do and do I need one?

    An RCCB, also called an ELCB, switches off power when it senses current leaking to earth, which helps reduce the risk of electric shock. Many newer homes have one on the main board. Please ask Mamatha Electricals to check whether your board has one and what adding it would cost.

Customer questions

No customer questions yet. Ask the business below.

Customer Reviews

Contact & Location

Address

KS 40, 14th Main Rd, 1st Stage, Kumaraswamy Layout

Bengaluru, Karnataka 560111

Share this page

Know someone who needs Mamatha Electricals? Send them this page.

https://www.localsaathi.in/business/mamatha-electricals-kumaraswamy-layout-bengaluru
Scan to open this page
Newsletter · Weekly drop

Get Deals & Updates

Weekly deals, new service launches, and expert tips — straight to your inbox.

No spam, ever. Unsubscribe in one click.

Mamatha Electricals — Electrician in Kumaraswamy Layout