Skip to main content
KNX Building & Home Automation, Home Automation in Kumaraswamy Layout, Bengaluru
1 / 1
Home Services
KNX Building & Home Automation

KNX Building & Home Automation

Kumaraswamy Layout, Bengaluru
Not verified Claimed

Live now:Today's deal

5% offyour bill

About

KNX Building & Home Automation is a home automation business in Kumaraswamy Layout, Bengaluru, Karnataka. The address on record is SMP Arcade, 2397/19, 18th Main Rd, Kumaraswamy Layout 2nd Stage. You can call or WhatsApp on the number shown on this page, or send an enquiry through LocalSaathi. Local businesses in this line of work can differ widely in what they offer, what they charge and how soon they can serve you. Before you decide: ask exactly what is included, the full price with any extra charges, the time it will take, and what happens if you are not satisfied. This listing is built from public business information and has not been verified by LocalSaathi or confirmed by the owner, so please check timings, services and charges directly with KNX Building & Home Automation. If this is your business, you can claim the listing to add your own photos, services and prices.

View Company Profile

Key Business Highlights

Deals today

1

Credentials & Certifications

LocalSaathi verification

Not verified yet

Awarded only after document verification

Services & Prices

  • Chandelier installation

    From β‚Ή800 / fitting

    Approx. price Β· confirm with the business

    Chandeliers and large hanging lights are assembled, hung from a strong hook or ceiling plate, wired and balanced. Heavy fittings and double height ceilings may need extra hands, a tall ladder or scaffolding, which raises the charge. Fitting many crystal pieces also adds time.

  • Exhaust fan installation

    From β‚Ή300 / fan

    Approx. price Β· confirm with the business

    An exhaust fan is fitted in a kitchen, bathroom or utility opening, wired to a switch and tested. If the opening needs cutting, a new frame or a longer wire, the charge usually goes up. Removing and cleaning an old greasy fan is often priced separately.

  • New wiring point

    From β‚Ή550 / point

    Approx. price Β· confirm with the business

    A new switch, socket or light point is added by running wire from the nearest board, through surface casing or a concealed conduit in the wall. Concealed work needs chasing and plaster repair, which can raise the price. Rates usually cover labour and wire for a short run.

  • Switchboard repair

    From β‚Ή350 / board

    Approx. price Β· confirm with the business

    Switchboards with loose wires, burn marks, heating or several faulty switches are opened, rewired and fitted with new parts where needed. The electrician usually checks that each switch controls the right point and that the box is firmly fixed. Larger boards cost more.

  • TV wall mount fitting

    From β‚Ή550 / TV

    Approx. price Β· confirm with the business

    A TV wall bracket is fixed with suitable anchors, the TV is mounted and levelled, and cables are tidied. A socket behind the TV or a cable conduit may be added at extra cost. Larger TVs and hard walls such as stone cladding usually take more time.

  • Wall or pendant light fitting

    From β‚Ή500 / light

    Approx. price Β· confirm with the business

    Wall lights, mirror lights, pendant lights and spotlights are fixed in place, connected to an existing or new point and tested. If there is no wire at the spot, a new line is run through casing or the wall, usually at extra cost. Outdoor lights need weather sealing.

More services

Fault finding

Fault finding

Time varies
Geyser installation

Geyser installation

Time varies
Inverter installation

Inverter installation

Time varies
Light fitting

Light fitting

Time varies
Smart switch installation

Smart switch installation

Time varies
Switch and socket repair

Switch and socket repair

Time varies

Hot Deals

1 live now

New codes every day Β· valid till 11:59 PM

Today's deal Offer of the day20 of 20 left today

5% off your bill

Valid all day today

Terms: 5% off the total bill. Code valid today only. Get a new code each day. One code per customer per deal per day. Cannot be combined with other offers unless the shop says so.

Share

Your code Β· KNX Building & Home Automation

Tap Get code to unlock

Free Single use Valid today

Codes are single-use and valid today only (till 11:59 PM, or earlier if the deal ends). Tomorrow, get a new code. If the shop refuses a code, report it under My Deals.

Gallery

Questions & Answers

Common questions

  • Where is KNX Building & Home Automation located?

    KNX Building & Home Automation is in Kumaraswamy Layout, Bengaluru. The address on record is SMP Arcade, 2397/19, 18th Main Rd, Kumaraswamy Layout 2nd Stage.

  • How can I contact KNX Building & Home Automation?

    Call or WhatsApp on the number shown on this page, or use Get Quote to send your requirement through LocalSaathi.

  • What should I ask a home automation business before deciding?

    Ask exactly what is included, the full price with any extra charges, the time it will take, and what happens if you are not satisfied.

  • Is KNX Building & Home Automation verified by LocalSaathi?

    Not yet. The details come from public business information and the owner has not claimed this listing, so please confirm them directly with the business.

  • What does an RCCB do and do I need one?

    An RCCB, also called an ELCB, switches off power when it senses current leaking to earth, which helps reduce the risk of electric shock. Many newer homes have one on the main board. Please ask KNX Building & Home Automation to check whether your board has one and what adding it would cost.

  • Does KNX Building & Home Automation have an annual maintenance plan?

    Some electricians and firms have yearly maintenance plans for apartments, offices or larger homes, covering periodic checks of boards, earthing and fittings. Whether KNX Building & Home Automation has an AMC is not confirmed here, so please ask them what it would cover and cost.

  • Can KNX Building & Home Automation install an inverter and battery?

    Many home electricians install inverters, connect batteries and separate backup circuits for lights and fans. Labour is usually around Rs 400 to 1,200 depending on how much rewiring is needed. Please ask KNX Building & Home Automation whether they do inverter work and how they charge.

  • Why does my MCB keep tripping?

    An MCB usually trips because of an overloaded circuit, a short circuit, a faulty appliance or moisture in a switch or socket. Note when it trips and what is running at the time. Please ask KNX Building & Home Automation about a visit to trace the cause, and confirm the visit charge first.

Customer questions

No customer questions yet. Ask the business below.

Customer Reviews

Contact & Location

Address

SMP Arcade, 2397/19, 18th Main Rd, Kumaraswamy Layout 2nd Stage, Kumaraswamy Layout

Bengaluru, Karnataka 560111

Share this page

Know someone who needs KNX Building & Home Automation? Send them this page.

https://www.localsaathi.in/business/knx-building-and-home-automation-kumaraswamy-layout-bengaluru
Scan to open this page
Newsletter Β· Weekly drop

Get Deals & Updates

Weekly deals, new service launches, and expert tips β€” straight to your inbox.

No spam, ever. Unsubscribe in one click.

KNX Building & Home Automation β€” Kumaraswamy Layout