Skip to main content
K B Electricals Works, Electrician in Bellandur, Bengaluru
1 / 1
Home Services
K B Electricals Works

K B Electricals Works

Bellandur, Bengaluru
Not verified Claimed

Live now:Today's deal

5% offyour bill

About

K B Electricals Works is an electrician in Bellandur, Bengaluru, Karnataka. The address on record is 12th Cross Rd. You can call or WhatsApp on the number shown on this page, or send an enquiry through LocalSaathi. Electricians usually handle wiring, switches, fans, lights, fault-finding and small installations for homes, shops and offices. Before you decide: ask for the visit charge, a price before work begins, whether materials are included, and whether the work comes with any guarantee. This listing is built from public business information and has not been verified by LocalSaathi or confirmed by the owner, so please check timings, services and charges directly with K B Electricals Works. If this is your business, you can claim the listing to add your own photos, services and prices. Services listed for K B Electricals Works include electrician, fan repair and smart switch installation. Work on the main board is common for electricians in Bellandur, Bengaluru. This includes replacing faulty MCBs, adding an RCCB for shock protection, labelling circuits, and upgrading old fuse boxes to a distribution board. These jobs usually need the main power switched off for some time, so they are planned ahead. Once the job is done, test every point before the electrician from K B Electricals Works leaves. Switch fans to all speeds, turn lights on and off, plug a phone charger into new sockets, and reset the MCB once to check it holds. Ask for a written bill listing the work done and parts used.

View Company Profile

Key Business Highlights

Deals today

1

Credentials & Certifications

LocalSaathi verification

Not verified yet

Awarded only after document verification

Services & Prices

  • Distribution board installation

    From ₹1,600 / board

    Approx. price · confirm with the business

    An old fuse box or worn board is replaced with a new distribution board fitted with MCBs and, where suited, an RCCB for shock protection. Circuits are usually labelled room by room. Cost depends on the number of ways, the parts used and any wiring changes.

  • Inverter and battery installation

    From ₹750 / set

    Approx. price · confirm with the business

    A home inverter is fixed in place, connected to its battery and wired so that chosen lights, fans and sockets run on backup during power cuts. The charge rises if separate backup wiring is needed across the house. Battery water and terminal checks are usually explained.

  • MCB replacement

    From ₹300 / MCB

    Approx. price · confirm with the business

    A faulty or often tripping MCB in the distribution board is replaced with a new one of the right rating. The electrician usually checks whether the trip came from an overloaded circuit or a fault elsewhere. The MCB part cost is usually added to the labour charge.

  • Smart switch installation

    From ₹400 / switch

    Approx. price · confirm with the business

    Existing switches are replaced with smart switch modules that work from a phone app, a schedule or a voice assistant. The electrician usually checks for a neutral wire at the board, fits the modules and pairs them with the home Wi-Fi. The smart switch itself is priced separately.

  • Switch or socket replacement

    From ₹120 / point

    Approx. price · confirm with the business

    Loose, burnt or sparking switches and sockets are replaced on the same board, and connections are tightened and tested. The rate usually covers labour per point, with the switch or socket added to the bill. A full board plate change may be priced separately.

  • Tube light or LED batten fitting

    From ₹100 / light

    Approx. price · confirm with the business

    A new tube light, LED batten or LED panel is fixed to the wall or ceiling, connected to the existing point and tested. Swapping old tube lights with chokes for LED battens is a common request. The light itself is usually bought separately or added to the bill.

More services

Earthing work

Earthing work

Time varies
Geyser installation

Geyser installation

Time varies
Home automation setup

Home automation setup

Time varies
Light fitting

Light fitting

Time varies
New wiring points

New wiring points

Time varies

Hot Deals

1 live now

New codes every day · valid till 11:59 PM

Today's deal Offer of the day20 of 20 left today

5% off your bill

Valid all day today

Terms: 5% off the total bill. Code valid today only. Get a new code each day. One code per customer per deal per day. Cannot be combined with other offers unless the shop says so.

Share

Your code · K B Electricals Works

Tap Get code to unlock

Free Single use Valid today

Codes are single-use and valid today only (till 11:59 PM, or earlier if the deal ends). Tomorrow, get a new code. If the shop refuses a code, report it under My Deals.

Gallery

Questions & Answers

Common questions

  • Where is K B Electricals Works located?

    K B Electricals Works is in Bellandur, Bengaluru. The address on record is 12th Cross Rd.

  • How can I contact K B Electricals Works?

    Call or WhatsApp on the number shown on this page, or use Get Quote to send your requirement through LocalSaathi.

  • What should I ask an electrician before deciding?

    Ask for the visit charge, a price before work begins, whether materials are included, and whether the work comes with any guarantee.

  • Is K B Electricals Works verified by LocalSaathi?

    Not yet. The details come from public business information and the owner has not claimed this listing, so please confirm them directly with the business.

  • Does K B Electricals Works fit chandeliers and decorative lights?

    Many electricians fit chandeliers, pendant lights and wall lights, usually charging more for heavy fittings or double height ceilings that need a tall ladder or scaffold. Please share the fitting details with K B Electricals Works and ask for the charge before booking.

  • Do smart switches need changes to my wiring?

    Many smart switches fit into existing switchboards, but some need a neutral wire at the board, which older homes may not have. Larger systems may need a hub. Please ask K B Electricals Works to check your boards before you buy smart switches.

  • Does K B Electricals Works give a warranty on repair work?

    Some electricians give a short service warranty on their labour, and parts like MCBs or fans may carry the maker's warranty. Terms vary a lot, so please ask K B Electricals Works what warranty, if any, applies to the work and parts before the job starts.

  • What kind of electrical work does K B Electricals Works usually handle?

    Home electricians usually handle fan and light fitting, switch and socket repairs, MCB and board work, new wiring points, geyser and inverter installation and fault finding. Some also do home automation. Please ask K B Electricals Works whether they take on the specific job you need.

Customer questions

No customer questions yet. Ask the business below.

Customer Reviews

Contact & Location

Address

12th Cross Rd, Bellandur

Bengaluru, Karnataka 560103

Share this page

Know someone who needs K B Electricals Works? Send them this page.

https://www.localsaathi.in/business/k-b-electricals-works-bellandur-bengaluru
Scan to open this page
Newsletter · Weekly drop

Get Deals & Updates

Weekly deals, new service launches, and expert tips — straight to your inbox.

No spam, ever. Unsubscribe in one click.

K B Electricals Works — Electrician in Bellandur, Bengaluru