Skip to main content
𝗟𝗲𝘁 𝗠𝗲 𝗥𝗲𝗽𝗮𝗶𝗿, Washing Machine Repair in Jogupalya, Bengaluru
1 / 1
Home Services
𝗟𝗲𝘁 𝗠𝗲 𝗥𝗲𝗽𝗮𝗶𝗿

𝗟𝗲𝘁 𝗠𝗲 𝗥𝗲𝗽𝗮𝗶𝗿

Jogupalya, Bengaluru
Not verified Claimed

Live now:Today's deal

5% offyour bill

About

𝗟𝗲𝘁 𝗠𝗲 𝗥𝗲𝗽𝗮𝗶𝗿 is a washing machine repair business in Jogupalya, Bengaluru, Karnataka. The address on record is No 30, Shammanna Gowda Layout, Main Channel Rd, Ulsoor. You can call or WhatsApp on the number shown on this page, or send an enquiry through LocalSaathi. Local businesses in this line of work can differ widely in what they offer, what they charge and how soon they can serve you. Before you decide: ask exactly what is included, the full price with any extra charges, the time it will take, and what happens if you are not satisfied. This listing is built from public business information and has not been verified by LocalSaathi or confirmed by the owner, so please check timings, services and charges directly with 𝗟𝗲𝘁 𝗠𝗲 𝗥𝗲𝗽𝗮𝗶𝗿. If this is your business, you can claim the listing to add your own photos, services and prices. Refrigerator work at a home appliance repair service usually covers cooling problems, gas leaks and refilling, thermostat and relay changes, defrost faults, door gasket replacement and compressor changes. Listed work for 𝗟𝗲𝘁 𝗠𝗲 𝗥𝗲𝗽𝗮𝗶𝗿 includes washing machine repair, mixer grinder repair and microwave repair. Double door and frost free fridges often have more electronic parts, so the cost of a repair can vary a lot. Old appliances may need several parts at once, so ask 𝗟𝗲𝘁 𝗠𝗲 𝗥𝗲𝗽𝗮𝗶𝗿 for a clear estimate of the total before agreeing. For a fridge or washing machine that is very old, it can help to compare the repair cost with the price of a new one before deciding.

View Company Profile

Key Business Highlights

Deals today

1

Credentials & Certifications

LocalSaathi verification

Not verified yet

Awarded only after document verification

Services & Prices

  • Appliance Inspection Visit

    From ₹400 / visit

    Approx. price · confirm with the business

    An inspection visit is when a technician comes to check the fault, tests the appliance and explains the repair needed with a cost. Many shops charge this fee once and adjust it against the bill if the repair goes ahead. Rates vary by area.

  • Geyser Heating Element Replacement

    From ₹1,200 / job

    Approx. price · confirm with the business

    A burnt heating element is the most common reason a geyser gives only cold water. The technician drains the tank, removes the old element, fits a new one and checks for leaks. Homes with hard water often see more scale on old elements.

  • Microwave Magnetron Replacement

    From ₹1,900 / job

    Approx. price · confirm with the business

    The magnetron produces the heat in a microwave. If the oven lights up and the plate turns but food stays cold, the magnetron is often the cause. Replacing it is one of the costlier microwave repairs, and price depends on the model.

  • Microwave Turntable Motor Replacement

    From ₹1,100 / job

    Approx. price · confirm with the business

    If the glass plate in a microwave stops turning, food heats unevenly. The usual cause is a worn turntable motor or coupler under the plate. The technician fits a matching motor and checks that the plate spins smoothly before closing the oven.

  • TV Wall Mounting

    From ₹450 / TV

    Approx. price · confirm with the business

    Wall mounting usually covers marking the height, drilling the wall, fixing the bracket, hanging the TV and tidying cables. A bracket may come with the TV or may need to be bought. Larger TVs and hard walls can cost a little more.

  • Washing Machine Inlet Valve Replacement

    From ₹1,200 / job

    Approx. price · confirm with the business

    An inlet valve controls water entering the drum. When it fails, the machine may not fill, may fill slowly or may keep filling. The usual fix is a new valve, fitted and tested with a short cycle. Price varies with the model and the part used.

More services

Geyser installation

Geyser installation

Time varies
Geyser repair

Geyser repair

Time varies
Induction cooktop repair

Induction cooktop repair

Time varies
Refrigerator repair

Refrigerator repair

Time varies
TV wall mounting

TV wall mounting

Time varies
Washing machine repair

Washing machine repair

Time varies

Hot Deals

1 live now

New codes every day · valid till 11:59 PM

Today's deal Offer of the day20 of 20 left today

5% off your bill

Valid all day today

Terms: 5% off the total bill. Code valid today only. Get a new code each day. One code per customer per deal per day. Cannot be combined with other offers unless the shop says so.

Share

Your code · 𝗟𝗲𝘁 𝗠𝗲 𝗥𝗲𝗽𝗮𝗶𝗿

Tap Get code to unlock

Free Single use Valid today

Codes are single-use and valid today only (till 11:59 PM, or earlier if the deal ends). Tomorrow, get a new code. If the shop refuses a code, report it under My Deals.

Gallery

Questions & Answers

Common questions

  • Where is 𝗟𝗲𝘁 𝗠𝗲 𝗥𝗲𝗽𝗮𝗶𝗿 located?

    𝗟𝗲𝘁 𝗠𝗲 𝗥𝗲𝗽𝗮𝗶𝗿 is in Jogupalya, Bengaluru. The address on record is No 30, Shammanna Gowda Layout, Main Channel Rd, Ulsoor.

  • How can I contact 𝗟𝗲𝘁 𝗠𝗲 𝗥𝗲𝗽𝗮𝗶𝗿?

    Call or WhatsApp on the number shown on this page, or use Get Quote to send your requirement through LocalSaathi.

  • What should I ask a washing machine repair business before deciding?

    Ask exactly what is included, the full price with any extra charges, the time it will take, and what happens if you are not satisfied.

  • Is 𝗟𝗲𝘁 𝗠𝗲 𝗥𝗲𝗽𝗮𝗶𝗿 verified by LocalSaathi?

    Not yet. The details come from public business information and the owner has not claimed this listing, so please confirm them directly with the business.

  • What payment modes does 𝗟𝗲𝘁 𝗠𝗲 𝗥𝗲𝗽𝗮𝗶𝗿 accept?

    Most repair services in Bengaluru accept cash and UPI, and some also take cards or bank transfers for larger bills. Please confirm the payment modes with 𝗟𝗲𝘁 𝗠𝗲 𝗥𝗲𝗽𝗮𝗶𝗿 and ask whether a GST bill is available if you need one.

  • How much does microwave repair usually cost?

    In Bengaluru, small microwave repairs like a fuse or door switch change may cost around ₹300 to ₹900, while a magnetron replacement can be ₹1,500 to ₹3,500. The model and part availability matter, so please confirm the cost with 𝗟𝗲𝘁 𝗠𝗲 𝗥𝗲𝗽𝗮𝗶𝗿.

  • Will I get a bill for the repair?

    Most repair services give a bill or written receipt listing the parts and labour, and some can share it on WhatsApp. A bill helps if the same problem returns. Please ask 𝗟𝗲𝘁 𝗠𝗲 𝗥𝗲𝗽𝗮𝗶𝗿 for an itemised bill and confirm whether a GST bill is possible.

  • How long does a typical repair take?

    Small fixes like a switch, fuse or valve change often take under an hour, while gas refilling, compressor changes or board repairs can take several hours or more than one visit. Please ask 𝗟𝗲𝘁 𝗠𝗲 𝗥𝗲𝗽𝗮𝗶𝗿 how long your repair is likely to take.

Customer questions

No customer questions yet. Ask the business below.

Customer Reviews

Contact & Location

Address

No 30, Shammanna Gowda Layout, Main Channel Rd, Ulsoor, Jogupalya

Bengaluru, Karnataka 560008

Share this page

Know someone who needs 𝗟𝗲𝘁 𝗠𝗲 𝗥𝗲𝗽𝗮𝗶𝗿? Send them this page.

https://www.localsaathi.in/business/jogupalya-bengaluru
Scan to open this page
Newsletter · Weekly drop

Get Deals & Updates

Weekly deals, new service launches, and expert tips — straight to your inbox.

No spam, ever. Unsubscribe in one click.

𝗟𝗲𝘁 𝗠𝗲 𝗥𝗲𝗽𝗮𝗶𝗿 — Jogupalya