Skip to main content
Imran Auto Lathe Works, Car Mechanics in Rajajinagar, Bengaluru
1 / 1
Automobiles

Imran Auto Lathe Works

Rajajinagar, Bengaluru
Not verified Claimed

Live now:Today's deal

5% offyour bill

About

Imran Auto Lathe Works is a car repair workshop in Rajajinagar, Bengaluru, Karnataka. The address on record is 1282, 6th Main Rd, Prakash Nagar. You can call or WhatsApp on the number shown on this page, or send an enquiry through LocalSaathi. Vehicle workshops usually handle periodic servicing, engine and brake repairs, electrical faults and parts replacement, for one brand or for many. Before you decide: ask for an estimate before work starts, whether parts are genuine, whether there is a warranty on the repair, and when the vehicle will be ready. This listing is built from public business information and has not been verified by LocalSaathi or confirmed by the owner, so please check timings, services and charges directly with Imran Auto Lathe Works. If this is your business, you can claim the listing to add your own photos, services and prices. Services listed for Imran Auto Lathe Works include car service and car repair & service. Garages of this type in Rajajinagar, Bengaluru usually start a periodic service by changing engine oil and the oil filter, cleaning or replacing the air filter, and checking brakes, coolant, belts, tyres and lights. Any extra work found during the check is usually explained to the owner before it is done. If your car will not start or does not feel right to drive, call Imran Auto Lathe Works first and describe the problem. Mechanics can sometimes tell over the phone whether it is a battery, fuel or starter issue. If the car has to be moved, ask whether the garage can arrange towing and what it will cost.

Key Business Highlights

Deals today

1

Credentials & Certifications

LocalSaathi verification

Not verified yet

Awarded only after document verification

Services & Prices

  • AC cooling coil and blower cleaning

    From ₹4,500 / job

    Approx. price · confirm with the business

    When the AC smells musty or airflow is weak, the cooling coil and blower are often clogged with dust and leaves. Cleaning usually means removing part of the dashboard, so it takes a few hours. The cabin filter is normally replaced at the same time.

  • Battery testing, charging and terminal cleaning

    From ₹300 / job

    Approx. price · confirm with the business

    The battery is tested for charge and health, the terminals are cleaned of white or green deposits, and the battery is charged if it is weak. The charging output of the alternator is also checked. If the battery is too old, a new one costs extra.

  • Coolant flush and radiator check

    From ₹1,700 / job

    Approx. price · confirm with the business

    Old coolant is drained and the system is flushed and refilled with fresh coolant mixed to the right ratio. Hoses, the radiator cap and the fan are checked for leaks or wear. This helps prevent overheating in slow city traffic, especially in summer.

  • Dent repair and painting, one panel

    From ₹5,700 / panel

    Approx. price · confirm with the business

    Dents on a door, fender or bonnet are pulled out or filled, sanded and painted to match the car's colour. Price depends on the size of the dent, the paint type and whether the panel needs full or partial painting. Drying usually takes a day.

  • Timing belt replacement

    From ₹4,200 / job

    Approx. price · confirm with the business

    The timing belt keeps the engine's valves and pistons in step and must be changed at the interval in the owner's manual, often between 60,000 and 100,000 km. The tensioner and water pump are often changed at the same time. Some engines use a chain instead.

  • Wheel alignment and balancing

    From ₹1,500 / car

    Approx. price · confirm with the business

    Alignment sets the wheel angles so the car runs straight and the tyres wear evenly. Balancing adds small weights to stop vibration at speed. It is usually done after new tyres, suspension work, or when the steering pulls to one side. Alloy wheels may cost a little more.

More services

AC compressor repair

AC compressor repair

Time varies
Dent and paint work

Dent and paint work

Time varies
Engine diagnostic scan

Engine diagnostic scan

Time varies
Wheel alignment and balancing

Wheel alignment and balancing

Time varies

Hot Deals

1 live now

New codes every day · valid till 11:59 PM

Today's deal Offer of the day20 of 20 left today

5% off your bill

Valid all day today

Terms: 5% off the total bill. Code valid today only. Get a new code each day. One code per customer per deal per day. Cannot be combined with other offers unless the shop says so.

Share

Your code · Imran Auto Lathe Works

Tap Get code to unlock

Free Single use Valid today

Codes are single-use and valid today only (till 11:59 PM, or earlier if the deal ends). Tomorrow, get a new code. If the shop refuses a code, report it under My Deals.

Gallery

Questions & Answers

Common questions

  • Where is Imran Auto Lathe Works located?

    Imran Auto Lathe Works is in Rajajinagar, Bengaluru. The address on record is 1282, 6th Main Rd, Prakash Nagar.

  • How can I contact Imran Auto Lathe Works?

    Call or WhatsApp on the number shown on this page, or use Get Quote to send your requirement through LocalSaathi.

  • What should I ask a car repair workshop before deciding?

    Ask for an estimate before work starts, whether parts are genuine, whether there is a warranty on the repair, and when the vehicle will be ready.

  • Is Imran Auto Lathe Works verified by LocalSaathi?

    Not yet. The details come from public business information and the owner has not claimed this listing, so please confirm them directly with the business.

  • Does Imran Auto Lathe Works use genuine or original spare parts?

    Garages usually fit either company parts or aftermarket parts, and the price and fit can differ a lot between the two. Whether Imran Auto Lathe Works uses genuine parts is not confirmed here. Please ask Imran Auto Lathe Works which parts will be used and ask for the part boxes or bills.

  • Are the mechanics at Imran Auto Lathe Works trained to work on my car model?

    Local garages often work on many makes, though some models, especially newer automatic, diesel or electric cars, need particular tools and know-how. Whether the mechanics at Imran Auto Lathe Works are trained for your model is not confirmed here, so please ask Imran Auto Lathe Works before booking.

  • How often should a car be serviced?

    Most petrol and diesel cars need a service every 10,000 km or once a year, whichever comes first, though the owner's manual for your model is the final guide. Cars driven mostly in city traffic may need oil changes a little sooner. You can ask Imran Auto Lathe Works to check what is due.

  • Why does my car AC cool less than before?

    Weak cooling is often caused by low refrigerant gas from a small leak, a dirty cooling coil or cabin filter, a weak condenser fan or a compressor problem. A mechanic usually checks pressure and looks for leaks before refilling. Please ask Imran Auto Lathe Works to inspect it and give an estimate.

Customer questions

No customer questions yet. Ask the business below.

Customer Reviews

Contact & Location

Address

1282, 6th Main Rd, Prakash Nagar, Rajajinagar

Bengaluru, Karnataka 560021

Share this page

Know someone who needs Imran Auto Lathe Works? Send them this page.

https://www.localsaathi.in/business/imran-auto-lathe-works-rajajinagar-bengaluru
Scan to open this page
Newsletter · Weekly drop

Get Deals & Updates

Weekly deals, new service launches, and expert tips — straight to your inbox.

No spam, ever. Unsubscribe in one click.

Imran Auto Lathe Works — Car Mechanics in Rajajinagar