Skip to main content
B.M Motors Bikes Service Center, Two Wheeler Mechanics in Bommasandra, Bengaluru
1 / 1
Automobiles

B.M Motors Bikes Service Center

Bommasandra, Bengaluru
Not verified Claimed

Live now:Today's deal

5% offyour bill

About

B.M Motors Bikes Service Center is a two-wheeler repair workshop in Bommasandra Industrial Area, Bommasandra, Karnataka. The address on record is Battadasapura, Jigani Main Rd. You can call or WhatsApp on the number shown on this page, or send an enquiry through LocalSaathi. Vehicle workshops usually handle periodic servicing, engine and brake repairs, electrical faults and parts replacement, for one brand or for many. Before you decide: ask for an estimate before work starts, whether parts are genuine, whether there is a warranty on the repair, and when the vehicle will be ready. This listing is built from public business information and has not been verified by LocalSaathi or confirmed by the owner, so please check timings, services and charges directly with B.M Motors Bikes Service Center. If this is your business, you can claim the listing to add your own photos, services and prices. Services listed for B.M Motors Bikes Service Center include puncture repair, brake shoe replacement and carburettor cleaning. Brake work at a two-wheeler service shop in Bengaluru usually means replacing drum brake shoes or disc pads, adjusting the brake lever and cable, and bleeding the brake fluid on disc brakes. Riders often come in when the brakes squeak, feel spongy or need to be squeezed much harder than before. When you collect your bike from B.M Motors Bikes Service Center, ask to see the old parts that were changed and check the bill against the estimate. Take a short ride nearby to test the brakes, clutch and gears before leaving. Keep the bill and note the odometer reading for the next service.

Key Business Highlights

Deals today

1

Credentials & Certifications

LocalSaathi verification

Not verified yet

Awarded only after document verification

Services & Prices

  • Carburettor cleaning and tuning

    From β‚Ή900 / job

    Approx. price Β· confirm with the business

    The carburettor is removed, opened and cleaned of dirt and varnish, then refitted and tuned for a steady idle and smooth pickup. It helps with stalling, poor mileage and hard starting on older bikes. Worn gaskets or needles may be changed at extra cost.

  • Chain and sprocket kit replacement

    From β‚Ή1,800 / set

    Approx. price Β· confirm with the business

    The chain, front sprocket and rear sprocket are replaced together, as a new chain on worn sprockets wears out fast. Signs include a chain that keeps going loose, hooked teeth and a grinding noise. Prices vary with the bike model and kit chosen.

  • Clutch plate replacement

    From β‚Ή1,800 / job

    Approx. price Β· confirm with the business

    When the engine revs but the bike does not pick up speed, the clutch plates are often worn. The clutch cover is opened, the friction plates and springs are replaced as needed, and fresh oil is filled. The job usually takes a few hours.

  • Engine oil change

    From β‚Ή750 / job

    Approx. price Β· confirm with the business

    Old oil is drained through the sump bolt, the oil strainer or filter is cleaned or changed, and fresh oil of the right grade is filled. Most commuter bikes need about one litre. The price depends on the oil type and the engine size.

  • General service for a scooter

    From β‚Ή700 / service

    Approx. price Β· confirm with the business

    Includes an engine oil change, air filter cleaning, brake shoe adjustment and a check of the drive belt, rollers and battery. The variator area is often cleaned of dust, which helps smooth pickup. A wash is usually done at the end of the service.

  • Headlight, indicator and horn repair

    From β‚Ή850 / job

    Approx. price Β· confirm with the business

    Covers dead bulbs, a weak or silent horn, indicators that blink too fast, and loose or wet connectors. The mechanic traces the fault through the switch, fuse and wiring, then repairs or replaces the part. Water entry in the monsoon is a common cause.

More services

Chain sprocket kit replacement

Chain sprocket kit replacement

Time varies
Engine oil change

Engine oil change

Time varies
Engine overhaul

Engine overhaul

Time varies
Fork oil seal replacement

Fork oil seal replacement

Time varies
Scooter general service

Scooter general service

Time varies
Wiring and light repair

Wiring and light repair

Time varies

Hot Deals

1 live now

New codes every day Β· valid till 11:59 PM

Today's deal Offer of the day20 of 20 left today

5% off your bill

Valid all day today

Terms: 5% off the total bill. Code valid today only. Get a new code each day. One code per customer per deal per day. Cannot be combined with other offers unless the shop says so.

Share

Your code Β· B.M Motors Bikes Service Center

Tap Get code to unlock

Free Single use Valid today

Codes are single-use and valid today only (till 11:59 PM, or earlier if the deal ends). Tomorrow, get a new code. If the shop refuses a code, report it under My Deals.

Gallery

Questions & Answers

Common questions

  • Where is B.M Motors Bikes Service Center located?

    B.M Motors Bikes Service Center is in Bommasandra Industrial Area, Bommasandra. The address on record is Battadasapura, Jigani Main Rd.

  • How can I contact B.M Motors Bikes Service Center?

    Call or WhatsApp on the number shown on this page, or use Get Quote to send your requirement through LocalSaathi.

  • What should I ask a two-wheeler repair workshop before deciding?

    Ask for an estimate before work starts, whether parts are genuine, whether there is a warranty on the repair, and when the vehicle will be ready.

  • Is B.M Motors Bikes Service Center verified by LocalSaathi?

    Not yet. The details come from public business information and the owner has not claimed this listing, so please confirm them directly with the business.

  • How long does a general service usually take?

    A general service at a local shop usually takes two to four hours, depending on how busy the shop is and whether parts need changing. Engine or clutch work can take longer. Please ask B.M Motors Bikes Service Center when your bike is likely to be ready.

  • Should I ask for an estimate before the work begins?

    Yes, it helps to ask for a rough estimate with parts and labour mentioned, and to ask the mechanic to call before fitting anything extra. This makes it easier to compare the final bill. Please ask B.M Motors Bikes Service Center how they share estimates.

  • Can I see the old parts that were removed?

    It is common to ask for the old parts back or at least to see them, so you know what was changed. Please ask B.M Motors Bikes Service Center before the work starts if you would like the old parts kept aside for you to check.

  • Can I bring my own engine oil or spare parts to B.M Motors Bikes Service Center?

    Some shops fit oil or parts brought by the rider and charge only labour, while others prefer to use their own stock so they can stand behind the work. Please ask B.M Motors Bikes Service Center whether they fit customer parts and how labour is charged.

Customer questions

No customer questions yet. Ask the business below.

Customer Reviews

Contact & Location

Address

Battadasapura, Jigani Main Rd, Bommasandra

Bengaluru, Karnataka 560099

Share this page

Know someone who needs B.M Motors Bikes Service Center? Send them this page.

https://www.localsaathi.in/business/bm-motors-bikes-service-center-bommasandra-industrial-area-bommasandra
Scan to open this page
Newsletter Β· Weekly drop

Get Deals & Updates

Weekly deals, new service launches, and expert tips β€” straight to your inbox.

No spam, ever. Unsubscribe in one click.

B.M Motors Bikes Service Center β€” Two Wheeler Mechanics