Skip to main content
Bala Electrical, Electrician in Ramamurthy Nagar, Bengaluru
1 / 1
Home Services
Not verified Claimed

Live now:Today's deal

5% offyour bill

About

Bala Electrical is an electrician in Ramamurthy Nagar, Bengaluru, Karnataka. The address on record is 196, Kalkere Main Road, Bovi Colony. You can call or WhatsApp on the number shown on this page, or send an enquiry through LocalSaathi. Electricians usually handle wiring, switches, fans, lights, fault-finding and small installations for homes, shops and offices. Before you decide: ask for the visit charge, a price before work begins, whether materials are included, and whether the work comes with any guarantee. This listing is built from public business information and has not been verified by LocalSaathi or confirmed by the owner, so please check timings, services and charges directly with Bala Electrical. If this is your business, you can claim the listing to add your own photos, services and prices. Services listed for Bala Electrical include electrician, smart switch installation and fan repair. Fault finding is a large part of an electrician's work in Bengaluru. When the power trips, a room goes dark or a socket stops working, the electrician usually checks the board, tests each circuit, and traces the problem to a loose joint, damaged wire, faulty appliance or overloaded line. Once the job is done, test every point before the electrician from Bala Electrical leaves. Switch fans to all speeds, turn lights on and off, plug a phone charger into new sockets, and reset the MCB once to check it holds. Ask for a written bill listing the work done and parts used.

View Company Profile

Key Business Highlights

Deals today

1

Credentials & Certifications

LocalSaathi verification

Not verified yet

Awarded only after document verification

Services & Prices

  • Ceiling fan repair

    From ₹350 / fan

    Approx. price · confirm with the business

    Common fan problems include slow speed, humming, wobbling, noise or a fan that does not start. The electrician usually checks the capacitor, regulator, bearings and wiring, and balances the blades. Motor winding repairs may need the fan taken to a workshop.

  • Distribution board installation

    From ₹2,400 / board

    Approx. price · confirm with the business

    An old fuse box or worn board is replaced with a new distribution board fitted with MCBs and, where suited, an RCCB for shock protection. Circuits are usually labelled room by room. Cost depends on the number of ways, the parts used and any wiring changes.

  • Earth pit installation

    From ₹4,300 / pit

    Approx. price · confirm with the business

    A new earth pit is dug, an earth electrode and filling material are placed, and an earth wire is run to the main board. Earthing helps reduce the risk of shocks from metal appliances. Cost depends on depth, electrode type and wire length.

  • Electrician visit and inspection

    From ₹350 / visit

    Approx. price · confirm with the business

    A basic visit where the electrician checks the problem, such as a dead socket, tripping MCB or flickering light, and explains the fault and the cost of fixing it. Many electricians adjust this charge against the repair if you go ahead. Parts are priced separately.

  • Switchboard repair

    From ₹450 / board

    Approx. price · confirm with the business

    Switchboards with loose wires, burn marks, heating or several faulty switches are opened, rewired and fitted with new parts where needed. The electrician usually checks that each switch controls the right point and that the box is firmly fixed. Larger boards cost more.

  • TV wall mount fitting

    From ₹350 / TV

    Approx. price · confirm with the business

    A TV wall bracket is fixed with suitable anchors, the TV is mounted and levelled, and cables are tidied. A socket behind the TV or a cable conduit may be added at extra cost. Larger TVs and hard walls such as stone cladding usually take more time.

More services

Fan repair

Fan repair

Time varies
Geyser installation

Geyser installation

Time varies
MCB and DB work

MCB and DB work

Time varies
Smart switch installation

Smart switch installation

Time varies
Switch and socket repair

Switch and socket repair

Time varies

Hot Deals

1 live now

New codes every day · valid till 11:59 PM

Today's deal Offer of the day20 of 20 left today

5% off your bill

Valid all day today

Terms: 5% off the total bill. Code valid today only. Get a new code each day. One code per customer per deal per day. Cannot be combined with other offers unless the shop says so.

Share

Your code · Bala Electrical

Tap Get code to unlock

Free Single use Valid today

Codes are single-use and valid today only (till 11:59 PM, or earlier if the deal ends). Tomorrow, get a new code. If the shop refuses a code, report it under My Deals.

Gallery

Questions & Answers

Common questions

  • Where is Bala Electrical located?

    Bala Electrical is in Ramamurthy Nagar, Bengaluru. The address on record is 196, Kalkere Main Road, Bovi Colony.

  • How can I contact Bala Electrical?

    Call or WhatsApp on the number shown on this page, or use Get Quote to send your requirement through LocalSaathi.

  • What should I ask an electrician before deciding?

    Ask for the visit charge, a price before work begins, whether materials are included, and whether the work comes with any guarantee.

  • Is Bala Electrical verified by LocalSaathi?

    Not yet. The details come from public business information and the owner has not claimed this listing, so please confirm them directly with the business.

  • How much is the visit charge for an electrician?

    In Bengaluru, a home electrician's visit or inspection charge is usually around Rs 150 to 400, and some adjust it against the job if you go ahead. Please confirm the visit charge with Bala Electrical before booking.

  • Do smart switches need changes to my wiring?

    Many smart switches fit into existing switchboards, but some need a neutral wire at the board, which older homes may not have. Larger systems may need a hub. Please ask Bala Electrical to check your boards before you buy smart switches.

  • Why does my MCB keep tripping?

    An MCB usually trips because of an overloaded circuit, a short circuit, a faulty appliance or moisture in a switch or socket. Note when it trips and what is running at the time. Please ask Bala Electrical about a visit to trace the cause, and confirm the visit charge first.

  • How much does an earthing check or new earth pit cost?

    Testing the earthing in a home is often part of a regular visit, while a new earth pit in Bengaluru can cost around Rs 2,000 to 6,000 depending on the type and depth. Please ask Bala Electrical for an inspection and estimate.

Customer questions

No customer questions yet. Ask the business below.

Customer Reviews

Contact & Location

Share this page

Know someone who needs Bala Electrical? Send them this page.

https://www.localsaathi.in/business/bala-electrical-ramamurthy-nagar-bengaluru
Scan to open this page
Newsletter · Weekly drop

Get Deals & Updates

Weekly deals, new service launches, and expert tips — straight to your inbox.

No spam, ever. Unsubscribe in one click.

Bala Electrical — Electrician in Ramamurthy Nagar, Bengaluru