Skip to main content
Auto Pro 3D Wheel Alignment Tyres Car Service, Car Mechanics in Begur, Bengaluru
1 / 1
Automobiles

Auto Pro 3D Wheel Alignment Tyres Car Service

Begur, Bengaluru
Not verified Claimed

Live now:Today's deal

5% offyour bill

About

Auto Pro 3D Wheel Alignment Tyres Car Service is a car repair workshop in Begur, Bengaluru, Karnataka. The address on record is 167/3, Manipal County Rd, near Samruddi Kuteera, Chikka Begur, Industrial Layout. You can call or WhatsApp on the number shown on this page, or send an enquiry through LocalSaathi. Vehicle workshops usually handle periodic servicing, engine and brake repairs, electrical faults and parts replacement, for one brand or for many. Before you decide: ask for an estimate before work starts, whether parts are genuine, whether there is a warranty on the repair, and when the vehicle will be ready. This listing is built from public business information and has not been verified by LocalSaathi or confirmed by the owner, so please check timings, services and charges directly with Auto Pro 3D Wheel Alignment Tyres Car Service. If this is your business, you can claim the listing to add your own photos, services and prices.

Key Business Highlights

Deals today

1

Credentials & Certifications

LocalSaathi verification

Not verified yet

Awarded only after document verification

Services & Prices

  • AC compressor repair or replacement

    From β‚Ή12,200 / job

    Approx. price Β· confirm with the business

    A noisy compressor, a clutch that does not engage, or no cooling at all may point to a compressor fault. Depending on the cause, the clutch or valve is repaired, or the compressor is replaced and the system flushed and refilled with gas and oil.

  • Alternator or starter motor repair

    From β‚Ή3,600 / job

    Approx. price Β· confirm with the business

    A car that cranks slowly, clicks without starting, or shows a battery light while driving may have a starter or alternator fault. The unit is removed, tested and repaired by replacing brushes, bearings or diodes, or changed if repair is not worth it.

  • Car AC gas top-up with leak test

    From β‚Ή3,400 / job

    Approx. price Β· confirm with the business

    The AC pressure is checked, the system is tested for leaks with dye or a detector, and refrigerant gas is topped up or refilled. Cooling is then measured at the vents. If a leak is found, fixing it usually costs extra before the refill.

  • Clutch plate, pressure plate and bearing set

    From β‚Ή12,500 / job

    Approx. price Β· confirm with the business

    The gearbox is taken out so the worn clutch plate, pressure plate and release bearing can be replaced together. Common signs of a worn clutch are slipping, a burning smell and a pedal that bites high. The job often takes most of a day.

  • Engine oil and oil filter change

    From β‚Ή4,500 / job

    Approx. price Β· confirm with the business

    Old oil is drained, a new filter is fitted and fresh oil of the right grade is filled to the mark. Most cars need this every 10,000 km or once a year. The price depends on how many litres the engine takes and the oil type.

  • Towing a car within the city

    From β‚Ή2,100 / trip

    Approx. price Β· confirm with the business

    A tow truck moves a car that will not start or cannot be driven to a garage of your choice. The rate usually depends on distance, the truck type and the time of day. Automatic and low cars are often moved on a flatbed, which costs more.

More services

Car AC gas refill

Car AC gas refill

Time varies
Car wiring repair

Car wiring repair

Time varies
Engine oil change

Engine oil change

Time varies
Suspension repair

Suspension repair

Time varies

Hot Deals

1 live now

New codes every day Β· valid till 11:59 PM

Today's deal Offer of the day20 of 20 left today

5% off your bill

Valid all day today

Terms: 5% off the total bill. Code valid today only. Get a new code each day. One code per customer per deal per day. Cannot be combined with other offers unless the shop says so.

Share

Your code Β· Auto Pro 3D Wheel Alignment Tyres Car Service

Tap Get code to unlock

Free Single use Valid today

Codes are single-use and valid today only (till 11:59 PM, or earlier if the deal ends). Tomorrow, get a new code. If the shop refuses a code, report it under My Deals.

Gallery

Questions & Answers

Common questions

  • Where is Auto Pro 3D Wheel Alignment Tyres Car Service located?

    Auto Pro 3D Wheel Alignment Tyres Car Service is in Begur, Bengaluru. The address on record is 167/3, Manipal County Rd, near Samruddi Kuteera, Chikka Begur, Industrial Layout.

  • How can I contact Auto Pro 3D Wheel Alignment Tyres Car Service?

    Call or WhatsApp on the number shown on this page, or use Get Quote to send your requirement through LocalSaathi.

  • What should I ask a car repair workshop before deciding?

    Ask for an estimate before work starts, whether parts are genuine, whether there is a warranty on the repair, and when the vehicle will be ready.

  • Is Auto Pro 3D Wheel Alignment Tyres Car Service verified by LocalSaathi?

    Not yet. The details come from public business information and the owner has not claimed this listing, so please confirm them directly with the business.

  • When should brake pads be changed?

    Brake pads usually need checking at every service and changing when they wear thin, which in city driving can be every 20,000 to 40,000 km. Squealing, grinding or a longer stopping distance are common signs. Please ask Auto Pro 3D Wheel Alignment Tyres Car Service to measure the pads during your next visit.

  • How long does a regular car service usually take?

    A routine service at a local garage usually takes three to six hours, depending on the car, how busy the workshop is and whether extra repairs are found. Major repairs can take a day or more. Please ask Auto Pro 3D Wheel Alignment Tyres Car Service when your car is likely to be ready.

  • How much does towing a car usually cost within Bengaluru?

    Towing a car within Bengaluru usually costs around Rs 1,500 to 4,500, depending on distance, the type of truck and the time of day. Flatbed towing for automatic cars or longer trips costs more. Please ask Auto Pro 3D Wheel Alignment Tyres Car Service whether they arrange towing and at what rate.

  • Should I get a written estimate before the work starts?

    Yes, it is a good idea to ask for a written or WhatsApp estimate listing parts and labour, and to ask the garage to call before doing anything extra. This makes it easier to compare the final bill. Please ask Auto Pro 3D Wheel Alignment Tyres Car Service how they share estimates.

Customer questions

No customer questions yet. Ask the business below.

Customer Reviews

Contact & Location

Address

167/3, Manipal County Rd, near Samruddi Kuteera, Chikka Begur, Industrial Layout, Begur

Bengaluru, Karnataka 560114

Share this page

Know someone who needs Auto Pro 3D Wheel Alignment Tyres Car Service? Send them this page.

https://www.localsaathi.in/business/auto-pro-3d-wheel-alignment-tyres-car-service-begur-bengaluru
Scan to open this page
Newsletter Β· Weekly drop

Get Deals & Updates

Weekly deals, new service launches, and expert tips β€” straight to your inbox.

No spam, ever. Unsubscribe in one click.

Auto Pro 3D Wheel Alignment Tyres Car Service β€” Begur