Skip to main content
Aradhana Electronics, Electrician in Kengeri, Bengaluru
1 / 1
Home Services
Aradhana Electronics

Aradhana Electronics

Kengeri, Bengaluru
Not verified Claimed

Live now:Today's deal

5% offyour bill

About

Aradhana Electronics is an electrician in Kengeri, Bengaluru, Karnataka. The address on record is Kote beedi, Vidyapeetha Rd, near manjunatha condiments, Fort Kengeri. LocalSaathi does not have a phone number for Aradhana Electronics; use the map on this page for directions. Electricians usually handle wiring, switches, fans, lights, fault-finding and small installations for homes, shops and offices. Before you decide: ask for the visit charge, a price before work begins, whether materials are included, and whether the work comes with any guarantee. This listing is built from public business information and has not been verified by LocalSaathi or confirmed by the owner, so please check timings, services and charges directly with Aradhana Electronics. If this is your business, you can claim the listing to add your own photos, services and prices. Services listed for Aradhana Electronics include fan repair, light fitting and smart switch installation. Wiring work by an electrician of this type usually covers adding new points, replacing old aluminium or damaged wires, and running new lines through existing conduits. Concealed wiring in walls usually needs chasing and plaster work, while surface wiring uses casing or conduits fixed on the wall. For recurring issues, like a socket that keeps loosening or an MCB that trips every evening, tell Aradhana Electronics about the pattern rather than only the latest problem. Note which appliances were running at the time. Repeated trips often point to an overloaded circuit or a faulty appliance rather than the switch itself.

Key Business Highlights

Deals today

1

Credentials & Certifications

LocalSaathi verification

Not verified yet

Awarded only after document verification

Services & Prices

  • Ceiling fan repair

    From โ‚น350 / fan

    Approx. price ยท confirm with the business

    Common fan problems include slow speed, humming, wobbling, noise or a fan that does not start. The electrician usually checks the capacitor, regulator, bearings and wiring, and balances the blades. Motor winding repairs may need the fan taken to a workshop.

  • Exhaust fan installation

    From โ‚น280 / fan

    Approx. price ยท confirm with the business

    An exhaust fan is fitted in a kitchen, bathroom or utility opening, wired to a switch and tested. If the opening needs cutting, a new frame or a longer wire, the charge usually goes up. Removing and cleaning an old greasy fan is often priced separately.

  • Geyser installation

    From โ‚น500 / geyser

    Approx. price ยท confirm with the business

    A storage or instant geyser is fixed on the bathroom or kitchen wall, connected to a suitable power point and checked for earthing. The water inlet and outlet may be connected by a plumber. Extra pipes, a new socket or a longer wire run are usually charged separately.

  • Inverter and battery installation

    From โ‚น900 / set

    Approx. price ยท confirm with the business

    A home inverter is fixed in place, connected to its battery and wired so that chosen lights, fans and sockets run on backup during power cuts. The charge rises if separate backup wiring is needed across the house. Battery water and terminal checks are usually explained.

  • TV wall mount fitting

    From โ‚น400 / TV

    Approx. price ยท confirm with the business

    A TV wall bracket is fixed with suitable anchors, the TV is mounted and levelled, and cables are tidied. A socket behind the TV or a cable conduit may be added at extra cost. Larger TVs and hard walls such as stone cladding usually take more time.

  • Video doorbell installation

    From โ‚น750 / doorbell

    Approx. price ยท confirm with the business

    A video doorbell is fixed at the main door, connected to power or an existing bell wire, and linked to the home Wi-Fi and phone app. The electrician usually checks the signal near the door and the chime position inside. Running a new wire adds to the cost.

More services

Earthing work

Earthing work

Time varies
Fault finding

Fault finding

Time varies
Geyser installation

Geyser installation

Time varies
Inverter installation

Inverter installation

Time varies
MCB and DB work

MCB and DB work

Time varies
New wiring points

New wiring points

Time varies

Hot Deals

1 live now

New codes every day ยท valid till 11:59 PM

Today's deal Offer of the day20 of 20 left today

5% off your bill

Valid all day today

Terms: 5% off the total bill. Code valid today only. Get a new code each day. One code per customer per deal per day. Cannot be combined with other offers unless the shop says so.

Share

Your code ยท Aradhana Electronics

Tap Get code to unlock

Free Single use Valid today

Codes are single-use and valid today only (till 11:59 PM, or earlier if the deal ends). Tomorrow, get a new code. If the shop refuses a code, report it under My Deals.

Gallery

Questions & Answers

Common questions

  • Where is Aradhana Electronics located?

    Aradhana Electronics is in Kengeri, Bengaluru. The address on record is Kote beedi, Vidyapeetha Rd, near manjunatha condiments, Fort Kengeri.

  • How can I contact Aradhana Electronics?

    LocalSaathi has no phone number for Aradhana Electronics yet. Use Directions to visit. If you are the owner, claim this listing to add your number.

  • What should I ask an electrician before deciding?

    Ask for the visit charge, a price before work begins, whether materials are included, and whether the work comes with any guarantee.

  • Is Aradhana Electronics verified by LocalSaathi?

    Not yet. The details come from public business information and the owner has not claimed this listing, so please confirm them directly with the business.

  • How much does a new power point usually cost?

    Adding a new socket or switch point in Bengaluru usually costs around Rs 250 to 900 per point, depending on wire length, whether wiring is concealed or surface, and the parts used. Please check the rate with Aradhana Electronics.

  • Can Aradhana Electronics install an inverter and battery?

    Many home electricians install inverters, connect batteries and separate backup circuits for lights and fans. Labour is usually around Rs 400 to 1,200 depending on how much rewiring is needed. Please ask Aradhana Electronics whether they do inverter work and how they charge.

  • Do smart switches need changes to my wiring?

    Many smart switches fit into existing switchboards, but some need a neutral wire at the board, which older homes may not have. Larger systems may need a hub. Please ask Aradhana Electronics to check your boards before you buy smart switches.

  • Does Aradhana Electronics have an annual maintenance plan?

    Some electricians and firms have yearly maintenance plans for apartments, offices or larger homes, covering periodic checks of boards, earthing and fittings. Whether Aradhana Electronics has an AMC is not confirmed here, so please ask them what it would cover and cost.

Customer questions

No customer questions yet. Ask the business below.

Customer Reviews

Contact & Location

Address

Kote beedi, Vidyapeetha Rd, near manjunatha condiments, Fort Kengeri, Kengeri

Bengaluru, Karnataka 560060

Contact

No phone number listed. Use Get Quote to reach this business.

Share this page

Know someone who needs Aradhana Electronics? Send them this page.

https://www.localsaathi.in/business/aradhana-electronics-kengeri-bengaluru
Scan to open this page
Newsletter ยท Weekly drop

Get Deals & Updates

Weekly deals, new service launches, and expert tips โ€” straight to your inbox.

No spam, ever. Unsubscribe in one click.

Aradhana Electronics โ€” Electrician in Kengeri | LocalSaathi