Skip to main content
Anjaneya Electricals & Electronics, Electrician in HSR Layout, Bengaluru
1 / 1
Home Services
Anjaneya Electricals & Electronics

Anjaneya Electricals & Electronics

HSR Layout, Bengaluru
Not verified Claimed

Live now:Today's deal

5% offyour bill

About

Anjaneya Electricals & Electronics is an electrician in HSR Layout, Bengaluru, Karnataka. The address on record is No.336, 24th Main Rd, Phase 3, Agara Village, 1st Sector. You can call or WhatsApp on the number shown on this page, or send an enquiry through LocalSaathi. Electricians usually handle wiring, switches, fans, lights, fault-finding and small installations for homes, shops and offices. Before you decide: ask for the visit charge, a price before work begins, whether materials are included, and whether the work comes with any guarantee. This listing is built from public business information and has not been verified by LocalSaathi or confirmed by the owner, so please check timings, services and charges directly with Anjaneya Electricals & Electronics. If this is your business, you can claim the listing to add your own photos, services and prices. Services listed for Anjaneya Electricals & Electronics include fan repair, home automation setup and MCB and DB work. Earthing is another area many electricians handle. Over time, earth pits can dry out or corrode, which may cause shocks from appliances or poor performance of inverters. Electricians usually test the earth connection, and where needed, rework the pit, replace the earth wire or add a new earthing point. For new fittings like chandeliers, wall lights or fans, buy the fitting first and check that it comes with screws, hooks and a mounting plate. Share the fitting type and ceiling height with Anjaneya Electricals & Electronics so the electrician brings a ladder and the right tools. Heavy chandeliers usually need a strong hook or ceiling plate.

Key Business Highlights

Deals today

1

Credentials & Certifications

LocalSaathi verification

Not verified yet

Awarded only after document verification

Services & Prices

  • Ceiling fan repair

    From β‚Ή350 / fan

    Approx. price Β· confirm with the business

    Common fan problems include slow speed, humming, wobbling, noise or a fan that does not start. The electrician usually checks the capacitor, regulator, bearings and wiring, and balances the blades. Motor winding repairs may need the fan taken to a workshop.

  • Exhaust fan installation

    From β‚Ή350 / fan

    Approx. price Β· confirm with the business

    An exhaust fan is fitted in a kitchen, bathroom or utility opening, wired to a switch and tested. If the opening needs cutting, a new frame or a longer wire, the charge usually goes up. Removing and cleaning an old greasy fan is often priced separately.

  • Home automation setup, one room

    From β‚Ή4,200 / room

    Approx. price Β· confirm with the business

    Lights, fans and sockets in one room are fitted with smart modules or a smart panel and set up on a phone app, with scenes and schedules such as night mode. Cost varies with the number of switches, the modules chosen and whether a hub is needed.

  • Switchboard repair

    From β‚Ή170 / board

    Approx. price Β· confirm with the business

    Switchboards with loose wires, burn marks, heating or several faulty switches are opened, rewired and fitted with new parts where needed. The electrician usually checks that each switch controls the right point and that the box is firmly fixed. Larger boards cost more.

  • Video doorbell installation

    From β‚Ή900 / doorbell

    Approx. price Β· confirm with the business

    A video doorbell is fixed at the main door, connected to power or an existing bell wire, and linked to the home Wi-Fi and phone app. The electrician usually checks the signal near the door and the chime position inside. Running a new wire adds to the cost.

  • Wall or pendant light fitting

    From β‚Ή450 / light

    Approx. price Β· confirm with the business

    Wall lights, mirror lights, pendant lights and spotlights are fixed in place, connected to an existing or new point and tested. If there is no wire at the spot, a new line is run through casing or the wall, usually at extra cost. Outdoor lights need weather sealing.

More services

Geyser installation

Geyser installation

Time varies
Light fitting

Light fitting

Time varies
MCB and DB work

MCB and DB work

Time varies
New wiring points

New wiring points

Time varies
Smart switch installation

Smart switch installation

Time varies
Switch and socket repair

Switch and socket repair

Time varies

Hot Deals

1 live now

New codes every day Β· valid till 11:59 PM

Today's deal Offer of the day20 of 20 left today

5% off your bill

Valid all day today

Terms: 5% off the total bill. Code valid today only. Get a new code each day. One code per customer per deal per day. Cannot be combined with other offers unless the shop says so.

Share

Your code Β· Anjaneya Electricals & Electronics

Tap Get code to unlock

Free Single use Valid today

Codes are single-use and valid today only (till 11:59 PM, or earlier if the deal ends). Tomorrow, get a new code. If the shop refuses a code, report it under My Deals.

Gallery

Questions & Answers

Common questions

  • Where is Anjaneya Electricals & Electronics located?

    Anjaneya Electricals & Electronics is in HSR Layout, Bengaluru. The address on record is No.336, 24th Main Rd, Phase 3, Agara Village, 1st Sector.

  • How can I contact Anjaneya Electricals & Electronics?

    Call or WhatsApp on the number shown on this page, or use Get Quote to send your requirement through LocalSaathi.

  • What should I ask an electrician before deciding?

    Ask for the visit charge, a price before work begins, whether materials are included, and whether the work comes with any guarantee.

  • Is Anjaneya Electricals & Electronics verified by LocalSaathi?

    Not yet. The details come from public business information and the owner has not claimed this listing, so please confirm them directly with the business.

  • Who buys the parts, me or the electrician?

    Both are common. Electricians often bring standard parts like switches, holders and MCBs and add them to the bill, while some customers buy parts themselves to choose the make. Please ask Anjaneya Electricals & Electronics which they prefer, and ask for the part price separately on the bill.

  • Why does my MCB keep tripping?

    An MCB usually trips because of an overloaded circuit, a short circuit, a faulty appliance or moisture in a switch or socket. Note when it trips and what is running at the time. Please ask Anjaneya Electricals & Electronics about a visit to trace the cause, and confirm the visit charge first.

  • What should I do if I get a mild shock from a switch or appliance?

    Stop using the switch or appliance, switch off its MCB, and keep others away from it. A mild shock often points to an earthing problem or damaged insulation. Call Anjaneya Electricals & Electronics or another electrician to check it before using that point again.

  • Are the technicians at Anjaneya Electricals & Electronics verified?

    Some electrical service firms say their technicians are background-verified or police-verified, while many local electricians work through word of mouth. This is not confirmed for Anjaneya Electricals & Electronics, so please ask them about any verification and the name of the person who will visit.

Customer questions

No customer questions yet. Ask the business below.

Customer Reviews

Contact & Location

Address

No.336, 24th Main Rd, Phase 3, Agara Village, 1st Sector, HSR Layout

Bengaluru, Karnataka 560102

Share this page

Know someone who needs Anjaneya Electricals & Electronics? Send them this page.

https://www.localsaathi.in/business/anjaneya-electricals-and-electronics-hsr-layout-bengaluru
Scan to open this page
Newsletter Β· Weekly drop

Get Deals & Updates

Weekly deals, new service launches, and expert tips β€” straight to your inbox.

No spam, ever. Unsubscribe in one click.

Anjaneya Electricals & Electronics β€” HSR Layout