Skip to main content
Anand Electricals, Electrician in Kothanur, Bengaluru
1 / 1
Home Services
Anand Electricals

Anand Electricals

Kothanur, Bengaluru
Not verified Claimed

Live now:Today's deal

5% offyour bill

About

Anand Electricals is an electrician in Kothanur, Bengaluru, Karnataka. The address on record is SHOP NO.19, IDHAYA COMPLEX HENNUR BAGLUR, Hiremath Layout Main Rd, Geddalahalli, Rammana Layout. You can call or WhatsApp on the number shown on this page, or send an enquiry through LocalSaathi. Electricians usually handle wiring, switches, fans, lights, fault-finding and small installations for homes, shops and offices. Before you decide: ask for the visit charge, a price before work begins, whether materials are included, and whether the work comes with any guarantee. This listing is built from public business information and has not been verified by LocalSaathi or confirmed by the owner, so please check timings, services and charges directly with Anand Electricals. If this is your business, you can claim the listing to add your own photos, services and prices. Services listed for Anand Electricals include electrician, fault finding and MCB and DB work. Electricians of this type in Kothanur, Bengaluru usually fit and repair ceiling fans, wall fans and exhaust fans, including changing capacitors, regulators and bearings. They also install tube lights, LED panels, batten lights, decorative fittings and chandeliers, and replace bulb holders and switches that have worn out or burnt. Once the job is done, test every point before the electrician from Anand Electricals leaves. Switch fans to all speeds, turn lights on and off, plug a phone charger into new sockets, and reset the MCB once to check it holds. Ask for a written bill listing the work done and parts used.

Key Business Highlights

Deals today

1

Credentials & Certifications

LocalSaathi verification

Not verified yet

Awarded only after document verification

Services & Prices

  • Ceiling fan repair

    From ₹350 / fan

    Approx. price · confirm with the business

    Common fan problems include slow speed, humming, wobbling, noise or a fan that does not start. The electrician usually checks the capacitor, regulator, bearings and wiring, and balances the blades. Motor winding repairs may need the fan taken to a workshop.

  • Chandelier installation

    From ₹2,200 / fitting

    Approx. price · confirm with the business

    Chandeliers and large hanging lights are assembled, hung from a strong hook or ceiling plate, wired and balanced. Heavy fittings and double height ceilings may need extra hands, a tall ladder or scaffolding, which raises the charge. Fitting many crystal pieces also adds time.

  • Distribution board installation

    From ₹1,000 / board

    Approx. price · confirm with the business

    An old fuse box or worn board is replaced with a new distribution board fitted with MCBs and, where suited, an RCCB for shock protection. Circuits are usually labelled room by room. Cost depends on the number of ways, the parts used and any wiring changes.

  • Earth pit installation

    From ₹5,300 / pit

    Approx. price · confirm with the business

    A new earth pit is dug, an earth electrode and filling material are placed, and an earth wire is run to the main board. Earthing helps reduce the risk of shocks from metal appliances. Cost depends on depth, electrode type and wire length.

  • MCB replacement

    From ₹500 / MCB

    Approx. price · confirm with the business

    A faulty or often tripping MCB in the distribution board is replaced with a new one of the right rating. The electrician usually checks whether the trip came from an overloaded circuit or a fault elsewhere. The MCB part cost is usually added to the labour charge.

  • Switch or socket replacement

    From ₹120 / point

    Approx. price · confirm with the business

    Loose, burnt or sparking switches and sockets are replaced on the same board, and connections are tightened and tested. The rate usually covers labour per point, with the switch or socket added to the bill. A full board plate change may be priced separately.

More services

Earthing work

Earthing work

Time varies
Fan installation

Fan installation

Time varies
Fan repair

Fan repair

Time varies
Geyser installation

Geyser installation

Time varies
New wiring points

New wiring points

Time varies

Hot Deals

1 live now

New codes every day · valid till 11:59 PM

Today's deal Offer of the day20 of 20 left today

5% off your bill

Valid all day today

Terms: 5% off the total bill. Code valid today only. Get a new code each day. One code per customer per deal per day. Cannot be combined with other offers unless the shop says so.

Share

Your code · Anand Electricals

Tap Get code to unlock

Free Single use Valid today

Codes are single-use and valid today only (till 11:59 PM, or earlier if the deal ends). Tomorrow, get a new code. If the shop refuses a code, report it under My Deals.

Gallery

Questions & Answers

Common questions

  • Where is Anand Electricals located?

    Anand Electricals is in Kothanur, Bengaluru. The address on record is SHOP NO.19, IDHAYA COMPLEX HENNUR BAGLUR, Hiremath Layout Main Rd, Geddalahalli, Rammana Layout.

  • How can I contact Anand Electricals?

    Call or WhatsApp on the number shown on this page, or use Get Quote to send your requirement through LocalSaathi.

  • What should I ask an electrician before deciding?

    Ask for the visit charge, a price before work begins, whether materials are included, and whether the work comes with any guarantee.

  • Is Anand Electricals verified by LocalSaathi?

    Not yet. The details come from public business information and the owner has not claimed this listing, so please confirm them directly with the business.

  • Can Anand Electricals rewire an old house?

    Rewiring an older house is usually done room by room or floor by floor and priced per point or as a whole job after inspection. It may involve breaking plaster for concealed wiring. Please ask Anand Electricals whether they take on rewiring and for a written estimate.

  • Can Anand Electricals help with a new meter or load increase?

    A new meter or a load increase usually needs an application to the electricity supply company, often filed with help from a registered electrical contractor. Please ask Anand Electricals whether they handle this paperwork, and what documents and fees are involved.

  • Do smart switches need changes to my wiring?

    Many smart switches fit into existing switchboards, but some need a neutral wire at the board, which older homes may not have. Larger systems may need a hub. Please ask Anand Electricals to check your boards before you buy smart switches.

  • Does Anand Electricals give a GST bill for electrical work?

    Some electrical contractors can issue a GST bill, which may be needed by offices, shops or landlords. Many individual electricians do not. Please ask Anand Electricals whether they provide a GST bill before you book the work.

Customer questions

No customer questions yet. Ask the business below.

Customer Reviews

Contact & Location

Address

SHOP NO.19, IDHAYA COMPLEX HENNUR BAGLUR, Hiremath Layout Main Rd, Geddalahalli, Rammana Layout, Kothanur

Bengaluru, Karnataka 560077

Share this page

Know someone who needs Anand Electricals? Send them this page.

https://www.localsaathi.in/business/anand-electricals-kothanur-bengaluru
Scan to open this page
Newsletter · Weekly drop

Get Deals & Updates

Weekly deals, new service launches, and expert tips — straight to your inbox.

No spam, ever. Unsubscribe in one click.

Anand Electricals — Electrician in Kothanur | LocalSaathi